2019 Tsugami VA2 Vertical Machining Center
Have one to sell?
ConditionUsed
1 available
This 2019 Tsugami VA2 vertical machining center is equipped with a tool setter and a 14-tool ATC, running a 12,000 RPM spindle at approximately 7.5 HP. Travels measure 16.14" in X, 12.6" in Y, and 13.78" in Z over a 23.6" x 12.6" table.
Max Table Load: 330 lbs
Spindle Nose to Table: 5.9" to 19.7"
Rapid Traverse (X/Y/Z): 1,417 IPM
Cutting Feed Rate: 394 IPM
Electrical: 200V / 3 Phase / 50 Hz
Approximate Dimensions: 80" x 64" x 87"
Approximate Weight: 3,968 lbs
Tool Setter
Fanuc 0i-MD Control
This 2019 Tsugami VA2 vertical machining center is equipped with a tool setter and a 14-tool ATC, running a 12,000 RPM spindle at approximately 7.5 HP. Travels measure 16.14" in X, 12.6" in Y, and 13.78" in Z over a 23.6" x 12.6" table.
The Tsugami VA2, also searched as Tsugami VA 2 or VA-2, is a vertical machining center (VMC).
This 2019 machine has rapid traverse rates of 1,417 IPM on X, Y, and Z, a 394 IPM cutting feed rate, 5.9" to 19.7" from spindle nose to table, and a 330 lb max table load. It runs on 200V 3 phase 50 Hz power, with approximate dimensions of 80" x 64" x 87" and an approximate weight of 3,968 lbs.
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| X | 16.14" |
| Y | 12.6" |
| Z | 13.78" |
| Power | 10.1 hp |
| RPM | 12,000 RPM |
| # ATC | 14 |
| Table-W | 12.6" |
| Table-L | 23.6" |
| # Axis | 3 |
| Control | CNC (Fanuc) |
Max Table Load: 330 lbs
Spindle Nose to Table: 5.9" to 19.7"
Rapid Traverse (X/Y/Z): 1,417 IPM
Cutting Feed Rate: 394 IPM
Electrical: 200V / 3 Phase / 50 Hz
Approximate Dimensions: 80" x 64" x 87"
Approximate Weight: 3,968 lbs
Tool Setter
Fanuc 0i-MD Control
We use cookies to improve your experience. Privacy Policy.