2015 Okuma Millac 761VII Vertical Machining Center with 1,000 PSI Coolant
Have one to sell?
ConditionUsed
1 available
This 2015 Okuma Millac 761VII vertical machining center features 1,000 PSI high pressure coolant and tool breakage detection, with 60.63" x 29.92" x 25.98" of X/Y/Z travel. A CAT 50 spindle reaches 4,000 RPM with 25 HP (30-minute rating), over a 70.87" x 28.35" table rated for 4,400 lbs.
Continuous Spindle Power: 20 HP
Max Table Load: 4,400 lbs
Rapid Traverse (X, Y, Z): 630 IPM
Max Tool Weight: 44 lbs
Max Tool Diameter: 4.72" (Adjacent) / 7.87" (Non-Adjacent)
Okuma OSP 300M Control
1,000 PSI High Pressure Coolant
Tool Breakage Detection
Chip Conveyor
This 2015 Okuma Millac 761VII vertical machining center features 1,000 PSI high pressure coolant and tool breakage detection, with 60.63" x 29.92" x 25.98" of X/Y/Z travel. A CAT 50 spindle reaches 4,000 RPM with 25 HP (30-minute rating), over a 70.87" x 28.35" table rated for 4,400 lbs.
The Okuma Millac 761VII, also searched as Okuma Millac 761V II, Millac 761 VII, Millac 761V, or Millac 761, is a 50 taper vertical machining center (VMC, CNC mill).
This 2015 machine runs an Okuma OSP 300M control with rapid traverse of 630 IPM on X, Y, and Z, and its spindle is rated at 20 HP continuous. It handles tools up to 44 lbs and 4.72" in diameter (7.87" with adjacent pockets empty) and comes equipped with a chip conveyor.
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| X | 60.63" |
| Y | 29.92" |
| Z | 25.98" |
| Power | 25 hp |
| RPM | 4,000 RPM |
| Taper | CAT 50 |
| Table-W | 28.35" |
| Table-L | 70.87" |
| # Axis | 3 |
| Control | CNC (OKUMA) |
Continuous Spindle Power: 20 HP
Max Table Load: 4,400 lbs
Rapid Traverse (X, Y, Z): 630 IPM
Max Tool Weight: 44 lbs
Max Tool Diameter: 4.72" (Adjacent) / 7.87" (Non-Adjacent)
Okuma OSP 300M Control
1,000 PSI High Pressure Coolant
Tool Breakage Detection
Chip Conveyor
We use cookies to improve your experience. Privacy Policy.