2018 Haas UMC-750 5-Axis Vertical Machining Center with TSC
Have one to sell?
ConditionUsed
1 available
This 2018 Haas UMC-750 5-axis vertical machining center has 300 PSI through spindle coolant, Renishaw WIPS probing, and a 40+1 side-mount tool changer. It runs a 30 HP, 12,000 RPM 40-taper spindle with 30" of X and 20" of Z travel over a 19.7" x 24.8" table, and shows approximately 4,581 cycle start hours.
Table Size: 19.7" x 24.8"
Approximately 14,175 Power On Hours
Approximately 4,581 Cycle Start Hours
Approximately 3,783 Feed Cutting Hours
Through Spindle Coolant (300 PSI)
Renishaw WIPS Intuitive Probing
Dynamic Work Offset and Tool Center Point Control
Belt Type Chip Conveyor
Through Tool Air Blast
Programmable Coolant Nozzle
High Speed Machining
Second Home Position
Rigid Tapping
Remote Jog Handle, Color LCD
Ethernet Interface
Haas Connect
Media Display M-Code
Top Cover with Mist Extractor Provision
This 2018 Haas UMC-750 5-axis vertical machining center has 300 PSI through spindle coolant, Renishaw WIPS probing, and a 40+1 side-mount tool changer. It runs a 30 HP, 12,000 RPM 40-taper spindle with 30" of X and 20" of Z travel over a 19.7" x 24.8" table, and shows approximately 4,581 cycle start hours.
The Haas UMC-750, also searched as Haas UMC750, UMC 750, or UMC-750 universal machining center, is a 5-axis vertical machining center (5-axis VMC, UMC) with a trunnion table.
It comes equipped with Dynamic Work Offsets and TCPC, a belt type chip conveyor, through tool air blast, a programmable coolant nozzle, high speed machining, second home position, rigid tapping, a remote jog handle, Ethernet, Haas Connect, and a top cover with mist extractor provision, with approximately 14,175 power on hours and 3,783 feed cutting hours.
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| X | 30" |
| Y | 22" |
| Z | 20" |
| # Axis | 5 |
| Power | 30 hp |
| RPM | 12,000 RPM |
| # ATC | 41 |
| Taper | CAT 40 |
| Table-W | 19.7" |
| Table-L | 24.8" |
| Control | CNC (HAAS) |
Table Size: 19.7" x 24.8"
Approximately 14,175 Power On Hours
Approximately 4,581 Cycle Start Hours
Approximately 3,783 Feed Cutting Hours
Through Spindle Coolant (300 PSI)
Renishaw WIPS Intuitive Probing
Dynamic Work Offset and Tool Center Point Control
Belt Type Chip Conveyor
Through Tool Air Blast
Programmable Coolant Nozzle
High Speed Machining
Second Home Position
Rigid Tapping
Remote Jog Handle, Color LCD
Ethernet Interface
Haas Connect
Media Display M-Code
Top Cover with Mist Extractor Provision
We use cookies to improve your experience. Privacy Policy.