2018 Haas UMC-750 5-Axis Vertical Machining Center with TSC
Have one to sell?
ConditionUsed
1 available
This 2018 Haas UMC-750 5-axis vertical machining center comes with 300 PSI through spindle coolant, Renishaw WIPS probing, and dynamic work offsets with tool center point control. It has a 12,000 RPM, 30 HP CAT-40 spindle, a 40+1 side-mount tool changer, and 30" of X and 20" of Z travel over a 19.7" x 24.8" table.
Table Size: 19.7" x 24.8"
Approximately 14,175 Power On Hours
Approximately 4,581 Cycle Start Hours
Approximately 3,783 Feed Cutting Hours
Through Spindle Coolant (300 PSI)
Renishaw WIPS Intuitive Probing
Dynamic Work Offset and Tool Center Point Control (DWO/TCPC)
Side-Mount Tool Changer
Belt Type Chip Conveyor
Through Tool Air Blast
Programmable Coolant Nozzle
High Speed Machining
Second Home Position
Rigid Tapping
Remote Jog Handle with Color LCD
Ethernet Interface
Haas Connect
Media Display M-Code
Top Cover with Mist Extractor Provision
This 2018 Haas UMC-750 5-axis vertical machining center comes with 300 PSI through spindle coolant, Renishaw WIPS probing, and dynamic work offsets with tool center point control. It has a 12,000 RPM, 30 HP CAT-40 spindle, a 40+1 side-mount tool changer, and 30" of X and 20" of Z travel over a 19.7" x 24.8" table.
The Haas UMC-750, also searched as Haas UMC750, UMC 750, or UMC-750 universal machining center, is a 5-axis vertical machining center (5-axis VMC, UMC) with a trunnion table.
It comes equipped with Dynamic Work Offsets and TCPC, a belt type chip conveyor, through tool air blast, a programmable coolant nozzle, high speed machining, second home position, rigid tapping, a remote jog handle, Ethernet, Haas Connect, and a top cover with mist extractor provision, with approximately 14,175 power on hours and 3,783 feed cutting hours.
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| X | 30" |
| Z | 20" |
| # Axis | 5 |
| Power | 30 hp |
| RPM | 12,000 RPM |
| # ATC | 41 |
| Taper | CAT-40 |
| Control | CNC (HAAS) |
Table Size: 19.7" x 24.8"
Approximately 14,175 Power On Hours
Approximately 4,581 Cycle Start Hours
Approximately 3,783 Feed Cutting Hours
Through Spindle Coolant (300 PSI)
Renishaw WIPS Intuitive Probing
Dynamic Work Offset and Tool Center Point Control (DWO/TCPC)
Side-Mount Tool Changer
Belt Type Chip Conveyor
Through Tool Air Blast
Programmable Coolant Nozzle
High Speed Machining
Second Home Position
Rigid Tapping
Remote Jog Handle with Color LCD
Ethernet Interface
Haas Connect
Media Display M-Code
Top Cover with Mist Extractor Provision
We use cookies to improve your experience. Privacy Policy.