2025 DN Solutions BVM 5700 Vertical Machining Center with 20,000 RPM
Have one to sell?
ConditionUsed
1 available
This 2025 DN Solutions BVM 5700 bridge-type vertical machining center has a 20,000 RPM HSK-A63 spindle upgrade, Renishaw spindle probe and tool setter, and X/Y/Z glass scales. It offers 41.3" x 22.4" x 18.1" of X/Y/Z travel over a 51.2" x 22.4" table, with a 40-position ATC and Fanuc 0i-Plus control.
Max Table Load: 2,205 lbs
Electrical: 220V, 3 Phase, 50/60 Hz, 51 kVA
Approximate Weight: 16,535 lbs
Approximate Dimensions: 121.3" x 100.8" x 113.8" (Machine Only)
Fanuc 0i-Plus Control
Spindle Upgrade
Renishaw OMP60 Spindle Probe with HSK-A63 Shank and 3.94" Stylus
Renishaw OTS-AA Tool Setter
HSK-A63 Calibration Master and 2" Spindle Probe Calibration Ring
LNS Turbo MH Filtering Chip Conveyor, Right-Hand Discharge, Variable Speed, M-Code Control
LNS FOX WS2-700 Mist Collector, 700 CFM, 3-Stage Filtration, M-Code Interface
Automatic Door with Safety Edge
Coolant Gun
External Air Blow
Shower Coolant
X/Y/Z Glass Scales
This 2025 DN Solutions BVM 5700 bridge-type vertical machining center has a 20,000 RPM HSK-A63 spindle upgrade, Renishaw spindle probe and tool setter, and X/Y/Z glass scales. It offers 41.3" x 22.4" x 18.1" of X/Y/Z travel over a 51.2" x 22.4" table, with a 40-position ATC and Fanuc 0i-Plus control.
The DN Solutions BVM 5700, also searched as Doosan BVM 5700, BVM5700, or BVM-5700, is a bridge-type CNC vertical machining center (VMC).
This 2025 machine has a maximum table load of 2,205 lbs and runs on 220V, 3-phase power at 51 kVA. It comes equipped with an LNS Turbo MH chip conveyor, LNS FOX WS2-700 mist collector, automatic door, coolant gun, external air blow, and shower coolant, with approximate dimensions of 121.3" x 100.8" x 113.8" and an approximate weight of 16,535 lbs.
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| X | 41.3" |
| Y | 22.4" |
| Z | 18.1" |
| RPM | 20,000 RPM |
| # ATC | 40 |
| Taper | HSK-A63 |
| Table-W | 22.4" |
| Table-L | 51.2" |
| # Axis | 3 |
| Control | CNC (Fanuc) |
Max Table Load: 2,205 lbs
Electrical: 220V, 3 Phase, 50/60 Hz, 51 kVA
Approximate Weight: 16,535 lbs
Approximate Dimensions: 121.3" x 100.8" x 113.8" (Machine Only)
Fanuc 0i-Plus Control
Spindle Upgrade
Renishaw OMP60 Spindle Probe with HSK-A63 Shank and 3.94" Stylus
Renishaw OTS-AA Tool Setter
HSK-A63 Calibration Master and 2" Spindle Probe Calibration Ring
LNS Turbo MH Filtering Chip Conveyor, Right-Hand Discharge, Variable Speed, M-Code Control
LNS FOX WS2-700 Mist Collector, 700 CFM, 3-Stage Filtration, M-Code Interface
Automatic Door with Safety Edge
Coolant Gun
External Air Blow
Shower Coolant
X/Y/Z Glass Scales
We use cookies to improve your experience. Privacy Policy.