2008 Fryer ET-18 CNC Lathe with 8-Position Turret
Have one to sell?
ConditionUsed
1 available
This 2008 Fryer ET-18 is an 18" x 40" CNC/manual combination lathe with an eight-position programmable turret, digital handwheels, and a Touch 2000i conversational control. A 10 HP motor drives the D1-8 spindle through an infinitely variable two-speed auto-shift headstock, up to 2,500 RPM. The spindle carries a 12" 3-jaw chuck and has a 2.05" through hole.
Swing Over Cross Slide: 9.125"
Distance Between Centers: 40"
Cross Slide Travel: 10"
Bed Width: 14"
Spindle Nose: D1-8 Camlock
Spindle Through Hole: 2.05"
Taper in Reduction Sleeve: MT #4
Low Range Spindle Speed: 50 to 350 RPM
High Range Spindle Speed: 350 to 2,500 RPM
Tailstock Quill Travel: 5"
Tailstock Quill Taper: #5 Morse Taper
Approximate Dimensions: 86" x 72" x 68"
Approximate Weight: 6,500 lbs
Fryer Touch 2000i CNC Control with Conversational Graphics
Infinitely Variable Two Speed Auto Shift Headstock
Digital Handwheels
Eight Position Programmable Turret
3-Jaw Chuck
Flood Coolant System with Sliding Front Guards and Rear Coolant Splash Guard
This 2008 Fryer ET-18 is an 18" x 40" CNC/manual combination lathe with an eight-position programmable turret, digital handwheels, and a Touch 2000i conversational control. A 10 HP motor drives the D1-8 spindle through an infinitely variable two-speed auto-shift headstock, up to 2,500 RPM. The spindle carries a 12" 3-jaw chuck and has a 2.05" through hole.
The Fryer ET-18, also searched as Fryer ET18, Fryer ET 18, or Fryer Easy Turn ET-18, is an 18" x 40" flat bed CNC toolroom lathe with combination CNC and manual operation.
This 2008 machine has 9.125" of swing over the cross slide, 10" of cross slide travel, and a 14" bed width. Spindle speeds run 50 to 350 RPM in low range and 350 to 2,500 RPM in high range. The tailstock has 5" of quill travel with a #5 Morse taper. The machine also comes with an MT #4 reduction sleeve and a flood coolant system with sliding front guards and a rear splash guard. Approximate dimensions are 86" x 72" x 68", and approximate weight is 6,500 lbs.
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| Swing | 18" |
| Machining Length | 40" |
| # Axis | 2 |
| Chuck Size | 12" |
| Bar Capacity | 2.05" |
| Power | 10 hp |
| Max RPM | 2,500 RPM |
| Turning Dia | 10" |
| Tailstock | Yes |
| Live Tooling | No |
| Sub Spindle | No |
| Control | CNC (FRYER) |
| Dimensions | 86" x 72" x 68" |
| Weight | 6,500 lbs |
Swing Over Cross Slide: 9.125"
Distance Between Centers: 40"
Cross Slide Travel: 10"
Bed Width: 14"
Spindle Nose: D1-8 Camlock
Spindle Through Hole: 2.05"
Taper in Reduction Sleeve: MT #4
Low Range Spindle Speed: 50 to 350 RPM
High Range Spindle Speed: 350 to 2,500 RPM
Tailstock Quill Travel: 5"
Tailstock Quill Taper: #5 Morse Taper
Approximate Dimensions: 86" x 72" x 68"
Approximate Weight: 6,500 lbs
Fryer Touch 2000i CNC Control with Conversational Graphics
Infinitely Variable Two Speed Auto Shift Headstock
Digital Handwheels
Eight Position Programmable Turret
3-Jaw Chuck
Flood Coolant System with Sliding Front Guards and Rear Coolant Splash Guard
We use cookies to improve your experience. Privacy Policy.