2011 Southwestern Industries TRAK 2460SX CNC Lathe
Have one to sell?
ConditionUsed
1 available
This 2011 Southwestern Industries TRAK 2460SX 2-axis CNC lathe runs a ProtoTRAK SLX control with a 12" chuck, tailstock, and 4-position tool post. It has 24" of swing over the bed and 60" between centers, with a 4.09" spindle bore and two spindle speed ranges up to 1,800 RPM.
Cross Slide Travel (X): 12.5"
Spindle Speed Low Range: 40 to 670 RPM
Spindle Speed High Range: 100 to 1,800 RPM
Spindle Bore: 4.09"
Spindle Nose: D1-8
Width of Bed: 15.75"
Tailstock Quill Travel: 6.88"
Tailstock Quill Diameter: 3"
Tailstock Quill Taper Hole: 5 MT
Approximate Weight: 7,500 lbs
Approximate Dimensions: 114" x 53" x 70"
ProtoTRAK SLX Control
4-Position Tool Post
Coolant System
This 2011 Southwestern Industries TRAK 2460SX 2-axis CNC lathe runs a ProtoTRAK SLX control with a 12" chuck, tailstock, and 4-position tool post. It has 24" of swing over the bed and 60" between centers, with a 4.09" spindle bore and two spindle speed ranges up to 1,800 RPM.
Imperial
| Swing | 24" |
| Centers | 60" |
| Spindle Bore | 4.09" |
| RPM | 1,800 RPM |
| Swing Over Cross Slide | 14.5" |
| Control | CNC (Prototrak) |
Cross Slide Travel (X): 12.5"
Spindle Speed Low Range: 40 to 670 RPM
Spindle Speed High Range: 100 to 1,800 RPM
Spindle Bore: 4.09"
Spindle Nose: D1-8
Width of Bed: 15.75"
Tailstock Quill Travel: 6.88"
Tailstock Quill Diameter: 3"
Tailstock Quill Taper Hole: 5 MT
Approximate Weight: 7,500 lbs
Approximate Dimensions: 114" x 53" x 70"
ProtoTRAK SLX Control
4-Position Tool Post
Coolant System
We use cookies to improve your experience. Privacy Policy.