2012 Haas Super Mini Mill Vertical Machining Center with Probing
Have one to sell?
ConditionUsed
1 available
This 2012 Haas Super Mini Mill vertical machining center is equipped with Renishaw probing and wired for a 4th axis, with 16" x 12" x 10" travels over a 36" x 12" table. Its CT-40 spindle reaches 10,000 RPM, served by a 10-pocket tool changer with a 2.8 second tool-to-tool time and 1,200 IPM rapids.
Number of T-Slots: 3
Max Table Load: 500 lbs
Spindle Nose to Table: 4" to 14"
Rapids (X, Y, Z): 1,200 IPM
Tool to Tool Time: 2.8 Seconds
Electrical: 230V / 3 Phase / 60 Hz
Approximate Weight: 4,200 lbs
Approximate Dimensions: 90" x 64" x 100" H
Haas Control with USB Port
Renishaw Probing with Table Probe
Wired for 4th Axis
Rigid Tapping
Enable Rotation and Scaling
DNC
M19 Spindle Orient
Quick Code
Pre-Orient Tap
Advanced Tool Management
Intuitive Programming System
Air Blow Off Gun
Coolant Tank and Pump
Leveling Feet (4)
This 2012 Haas Super Mini Mill vertical machining center is equipped with Renishaw probing and wired for a 4th axis, with 16" x 12" x 10" travels over a 36" x 12" table. Its CT-40 spindle reaches 10,000 RPM, served by a 10-pocket tool changer with a 2.8 second tool-to-tool time and 1,200 IPM rapids.
Imperial
| X | 16" |
| Y | 12" |
| Z | 10" |
| Power | 15 hp |
| RPM | 10,000 RPM |
| # ATC | 10 |
| Taper | CAT 40 |
| Table-W | 12" |
| Table-L | 36" |
| # Axis | 3 |
| Control | CNC (HAAS) |
Number of T-Slots: 3
Max Table Load: 500 lbs
Spindle Nose to Table: 4" to 14"
Rapids (X, Y, Z): 1,200 IPM
Tool to Tool Time: 2.8 Seconds
Electrical: 230V / 3 Phase / 60 Hz
Approximate Weight: 4,200 lbs
Approximate Dimensions: 90" x 64" x 100" H
Haas Control with USB Port
Renishaw Probing with Table Probe
Wired for 4th Axis
Rigid Tapping
Enable Rotation and Scaling
DNC
M19 Spindle Orient
Quick Code
Pre-Orient Tap
Advanced Tool Management
Intuitive Programming System
Air Blow Off Gun
Coolant Tank and Pump
Leveling Feet (4)
We use cookies to improve your experience. Privacy Policy.