2023 HAAS VF-5SS w/ APC
Have one to sell?
ConditionUsed
1 available
Vertical Machining Center, used, features a 50" X travel, 26" Y travel, 25" Z travel, 12,000 RPM spindle, CAT 40 taper, and 30 ATC. Equipped with MIDACO APC, 10 Kurt vises, 30 hp power, through-spindle coolant.
TABLE LENGTH 1,320.8 mm
TABLE WIDTH 584.2 mm
NUMBER OF PALLETS 2
X-AXIS TRAVEL 1,270 mm
Y-AXIS TRAVEL 660.4 mm
Z-AXIS TRAVEL 635 mm
SPINDLE SPEED 12,000 RPM
SPINDLE MOTOR 22.4 kW
SPINDLE TAPER CAT 40
TOOL CAPACITY (ATC) 30
RAPID TRAVERSE - X AXIS 30.5 m/min.
RAPID TRAVERSE - Z-AXIS 30.5 m/min.
MIDACO PALLET CHANGER SERIES AS5025SD ($60,000 NEW) **PALLET SIZE: 50" X 24", W/ 2,000 LOAD CAPACITY ON PALLET
30 POSITION SIDE MOUNT TOOL CHANGER
(10) DOUBLE ACTION KURT HDL6 VISES
THROUGH-SPINDLE COOLANT(300 PSI)
PROGRAMMABLE COOLANT
WIRELESS INTUITIVE PROBING SYSTEM (WIPS)
ENCLOSURE EXHAUST SYSTEM
HIGH SPEED MACHINING (HSM)
12,000 RPM SPINDLE
32 GB MEMORY
MACROS
COORDINATE ROTATION & SCALING
RIGID TAPPING
M19 SPINDLE ORIENTATION
VPS EDITING
MEDIA DISPLAY
CHIP AUGER
PROVISION TO ACCEPT AUTOMATIC PALLET CHANGER
** ORIGINAL OWNER
** HOURS AS OF 6/10/2026 (SEE PHOTO)
- POWER ON TIME: 17,221 HOURS
- CYCLE START: 9,985 HOURS
- FEED CUTTING TIME: 8,065 HOURS
Vertical Machining Center, used, features a 50" X travel, 26" Y travel, 25" Z travel, 12,000 RPM spindle, CAT 40 taper, and 30 ATC. Equipped with MIDACO APC, 10 Kurt vises, 30 hp power, through-spindle coolant.
TABLE LENGTH 1,320.8 mm
TABLE WIDTH 584.2 mm
NUMBER OF PALLETS 2
X-AXIS TRAVEL 1,270 mm
Y-AXIS TRAVEL 660.4 mm
Z-AXIS TRAVEL 635 mm
SPINDLE SPEED 12,000 RPM
SPINDLE MOTOR 22.4 kW
SPINDLE TAPER CAT 40
TOOL CAPACITY (ATC) 30
RAPID TRAVERSE - X AXIS 30.5 m/min.
RAPID TRAVERSE - Z-AXIS 30.5 m/min.
MIDACO PALLET CHANGER SERIES AS5025SD ($60,000 NEW) **PALLET SIZE: 50" X 24", W/ 2,000 LOAD CAPACITY ON PALLET
30 POSITION SIDE MOUNT TOOL CHANGER
(10) DOUBLE ACTION KURT HDL6 VISES
THROUGH-SPINDLE COOLANT(300 PSI)
PROGRAMMABLE COOLANT
WIRELESS INTUITIVE PROBING SYSTEM (WIPS)
ENCLOSURE EXHAUST SYSTEM
HIGH SPEED MACHINING (HSM)
12,000 RPM SPINDLE
32 GB MEMORY
MACROS
COORDINATE ROTATION & SCALING
RIGID TAPPING
M19 SPINDLE ORIENTATION
VPS EDITING
MEDIA DISPLAY
CHIP AUGER
PROVISION TO ACCEPT AUTOMATIC PALLET CHANGER
** ORIGINAL OWNER
** HOURS AS OF 6/10/2026 (SEE PHOTO)
- POWER ON TIME: 17,221 HOURS
- CYCLE START: 9,985 HOURS
- FEED CUTTING TIME: 8,065 HOURS
We use cookies to improve your experience. Privacy Policy.