2017 Haas UMC-750 5-Axis Vertical Machining Center
Have one to sell?
ConditionUsed
1 available
This 2017 Haas UMC-750 5-axis vertical machining center runs an 8,100 RPM, 30 HP CT-40 spindle with a 40+1 tool changer, TCPC, and Dynamic Work Offsets. It has 30" x 20" x 20" of X/Y/Z travel over a 24.80" x 19.69" table, with approximately 39,072 power-on hours.
Approximate Table Size: 24.80" x 19.69"
Approximately 39,072 Power-On Hours
Tool Changes: 102,764
Power Requirements: 220 VAC, 3-Phase, 50/60 Hz, 70 A Full Load
4th and 5th Axis Drive and Wiring
TCPC (Tool Center Point Control)
DWO (Dynamic Work Offsets)
High-Speed Machining (HSM)
Rigid Tapping
Macros
Coordinate Rotation and Scaling
M19 Spindle Orientation
1GB Memory
VPS Editing
Media Display
Compensation Tables
This 2017 Haas UMC-750 5-axis vertical machining center runs an 8,100 RPM, 30 HP CT-40 spindle with a 40+1 tool changer, TCPC, and Dynamic Work Offsets. It has 30" x 20" x 20" of X/Y/Z travel over a 24.80" x 19.69" table, with approximately 39,072 power-on hours.
The Haas UMC-750, also searched as Haas UMC 750 or UMC750, is a 5-axis vertical machining center (5-axis VMC), sometimes listed as a universal machining center.
This machine has an approximate table size of 24.80" x 19.69" and has logged 102,764 tool changes. It also comes equipped with 4th and 5th axis drive and wiring, rigid tapping, macros, coordinate rotation and scaling, M19 spindle orientation, 1GB memory, VPS editing, media display, and compensation tables, with power requirements of 220 VAC, 3-phase, 50/60 Hz, 70 A full load.
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| X | 30" |
| Y | 20" |
| Z | 20" |
| # Axis | 5 |
| Power | 30 hp |
| RPM | 8,100 RPM |
| # ATC | 40 |
| Taper | CAT-40 |
| Control | CNC (HAAS) |
Approximate Table Size: 24.80" x 19.69"
Approximately 39,072 Power-On Hours
Tool Changes: 102,764
Power Requirements: 220 VAC, 3-Phase, 50/60 Hz, 70 A Full Load
4th and 5th Axis Drive and Wiring
TCPC (Tool Center Point Control)
DWO (Dynamic Work Offsets)
High-Speed Machining (HSM)
Rigid Tapping
Macros
Coordinate Rotation and Scaling
M19 Spindle Orientation
1GB Memory
VPS Editing
Media Display
Compensation Tables
We use cookies to improve your experience. Privacy Policy.