2011 Mazak Integrex 200-IV ST 5-Axis CNC Lathe with Probing
Have one to sell?
ConditionUsed
1 available
This 2011 Mazak Integrex 200-IV ST 5-axis mill-turn pairs a 12,000 RPM, 25 HP pendulum milling head with 225° of B-axis travel and a 40-station tool magazine, plus a 9-station lower turret, sub spindle, and Renishaw RMP-600 probe. It offers 26" of swing and 60" of machining length, with 8" Kitagawa chucks on both spindles and a 30 HP main spindle reaching 5,000 RPM.
Max Swing with Y-Axis: 19.70"
Distance Between Centers: 60"
Max Weight on Main & Sub Spindle: 660 lbs
X-Axis Travel: 22.8"
Y-Axis Travel: ±3.15"
Z-Axis Travel: 41.14"
W-Axis Travel (Sub Spindle): 41.34"
X2-Axis Travel: 5.91"
Z2-Axis Travel: 38.98"
B-Axis Travel: 225°
C-Axis: 360° (0.001°) Both Spindles
X Rapid Traverse Rate: 1,496 IPM
Y Rapid Traverse Rate: 1,093 IPM
Z Rapid Traverse Rate: 1,496 IPM
Main Spindle Nose: A2-6
Sub Spindle Nose: A2-6
Main Spindle Bore: 2.99"
Sub Spindle Bore: 2.99"
Sub Spindle Speed: 5,000 RPM
Sub Spindle Motor: 25 HP
Milling Spindle Speed: 12,000 RPM
Milling Spindle Motor: 25 HP
Milling Spindle Tool Type: KM63
Max Tool Diameter: 3.54"
Max Tool Length: 11.81"
Milling Spindle 90° Index Time: 0.5 Sec
Lower Turret Index Time: 0.14 Sec
Lower Turret OD Tool Size: 1"
Power Source: AC 400 V, Three Phase, 50/60 Hz
Power Requirement: 91.8 kVA
Approximate Dimensions (With Chip Conveyor): 240" x 104" x 106"
Approximate Weight: 26,840 lbs
12,000 RPM Pendulum Milling Head (Swivel Head)
40 Station Tool Magazine
9 Station Lower Turret
Servo Controlled Full C-Axis on Both Spindles
Y-Axis Capability
(2) 8" Kitagawa B-208A615 Chucks
Renishaw RMP-600 KM63 Probe
Kennametal KM63XMZGB60150Y Test Bar
High Pressure Coolant
Coolant Tank
Chiller Unit
Foot Operated Control for Chuck
Chip Conveyor
Linear Ways Construction
EIA/ISO Programming
3D Coordinate Conversion
Rigid Tapping
PCMCIA Card Slot
This 2011 Mazak Integrex 200-IV ST 5-axis mill-turn pairs a 12,000 RPM, 25 HP pendulum milling head with 225° of B-axis travel and a 40-station tool magazine, plus a 9-station lower turret, sub spindle, and Renishaw RMP-600 probe. It offers 26" of swing and 60" of machining length, with 8" Kitagawa chucks on both spindles and a 30 HP main spindle reaching 5,000 RPM.
The Mazak Integrex 200-IV ST, also searched as Integrex 200-4ST, Integrex 200 IV ST, Integrex 200IVST, Integrex 200-IVST, and Integrex 200, is a 5-axis mill-turn turning center with a B-axis milling head, sub spindle, and lower turret (multitasking lathe).
This 2011 machine has 22.8" of X-axis travel, ±3.15" of Y-axis travel, and 41.14" of Z-axis travel, with rapid rates of 1,496 IPM on X and Z and 1,093 IPM on Y, and a C-axis on both spindles. It comes equipped with high pressure coolant, a chiller unit, chip conveyor, foot-operated chuck control, and a Kennametal KM63 test bar, with approximate dimensions of 240" x 104" x 106" with conveyor and an approximate weight of 26,840 lbs.
All specifications are approximate, provided by the seller, and subject to buyer verification.
Max Swing with Y-Axis: 19.70"
Distance Between Centers: 60"
Max Weight on Main & Sub Spindle: 660 lbs
X-Axis Travel: 22.8"
Y-Axis Travel: ±3.15"
Z-Axis Travel: 41.14"
W-Axis Travel (Sub Spindle): 41.34"
X2-Axis Travel: 5.91"
Z2-Axis Travel: 38.98"
B-Axis Travel: 225°
C-Axis: 360° (0.001°) Both Spindles
X Rapid Traverse Rate: 1,496 IPM
Y Rapid Traverse Rate: 1,093 IPM
Z Rapid Traverse Rate: 1,496 IPM
Main Spindle Nose: A2-6
Sub Spindle Nose: A2-6
Main Spindle Bore: 2.99"
Sub Spindle Bore: 2.99"
Sub Spindle Speed: 5,000 RPM
Sub Spindle Motor: 25 HP
Milling Spindle Speed: 12,000 RPM
Milling Spindle Motor: 25 HP
Milling Spindle Tool Type: KM63
Max Tool Diameter: 3.54"
Max Tool Length: 11.81"
Milling Spindle 90° Index Time: 0.5 Sec
Lower Turret Index Time: 0.14 Sec
Lower Turret OD Tool Size: 1"
Power Source: AC 400 V, Three Phase, 50/60 Hz
Power Requirement: 91.8 kVA
Approximate Dimensions (With Chip Conveyor): 240" x 104" x 106"
Approximate Weight: 26,840 lbs
12,000 RPM Pendulum Milling Head (Swivel Head)
40 Station Tool Magazine
9 Station Lower Turret
Servo Controlled Full C-Axis on Both Spindles
Y-Axis Capability
(2) 8" Kitagawa B-208A615 Chucks
Renishaw RMP-600 KM63 Probe
Kennametal KM63XMZGB60150Y Test Bar
High Pressure Coolant
Coolant Tank
Chiller Unit
Foot Operated Control for Chuck
Chip Conveyor
Linear Ways Construction
EIA/ISO Programming
3D Coordinate Conversion
Rigid Tapping
PCMCIA Card Slot
We use cookies to improve your experience. Privacy Policy.