2010 Mazak Multiplex 6300 CNC Lathe with Gantry Loader
Have one to sell?
ConditionUsed
1 available
This 2010 Mazak Multiplex 6300 twin-spindle CNC lathe has a GL200F gantry robot with a 6-pallet pitch feed conveyor, plus left and right 12-position drum turrets with 4,000 RPM rotary tool spindles, run by a Mazatrol PC-Fusion 640T control. Both 30 HP spindles reach 4,000 RPM with 12" chucks and 3" bar capacity, over 16.93" of swing and a 25.59" max cutting length.
Standard Cutting Diameter: 13.0"
Maximum Cutting Length Chuckwork: 8.86"
Distance Between Spindle Faces (Max / Min): 57.09" / 9.82"
Spindle Nose: A2-8
Spindle Bore: 3.46"
Spindle Indexing (C-Axis): .001 deg. / 360,000 Positions
Spindle Torque: 441.34 ft-lbs
Type of Turrets: Dodecagonal/Drum Non-Lift
Tool Holder Shanks: Modified VDI
Turret Index Time (1 Step): 0.3 Sec
Total Number of Tools: 24 (12 x 2)
Tool Size Turning & Facing: 1" x 1"
Boring Bar Maximum Diameter: 2"
Mill Spindle Speed: 4,000 RPM
Mill Spindle Horsepower (10 Min): 10 HP
Mill Spindle Torque (4,000 RPM): 57.88 ft-lbs
Maximum Drill: 7/8"
Maximum End Mill: 13/16"
Maximum Tap: 8- 5/8 UNC
X-Axis Travel (L&R): 12.2"
Z-Axis Travel (L&R): 23.82"
Rapid Traverse X-Axis: 945 IPM
Rapid Traverse Z-Axis: 945 IPM
C-Axis Rapid: 400 RPM
Total Power Required (Machine Only): 68 kVA
Air Requirements: 71 PSI / 14 CFM
Approximate Floor Space (Without Automation or Bar Feeder): 95.3" x 167.7"
Approximate Height: 82.68"
Approximate Weight (Machine Only): 25,740 lbs
Gantry Robot Max Workpiece Weight: 44 lbs x 2
Gantry Robot Body Traverse Speed: 4,728 IPM
Gantry Robot Arm Up/Down Speed: 2,364 IPM
Gantry Robot Max Workpiece Size: 11.81" Dia. x 5.91" L
Pitch Feed Conveyor Pallets: 6
GL200F Gantry Robot with Type III Pitch Feed Conveyor
12" Chucks on Both Spindles
12 Position Drum Turrets L&R (VDI Straight Shank)
Rotary-Tool Spindles L&R
C-Axis 0.001 Degree Incr. L&R
Automatic Tool Eye L&R
Milling Spindle Synchronous Tapping L&R
Relocation Device
Chuck Air Blast L&R
Chip Conveyor Rear Disposal (Hinge Type)
This 2010 Mazak Multiplex 6300 twin-spindle CNC lathe has a GL200F gantry robot with a 6-pallet pitch feed conveyor, plus left and right 12-position drum turrets with 4,000 RPM rotary tool spindles, run by a Mazatrol PC-Fusion 640T control. Both 30 HP spindles reach 4,000 RPM with 12" chucks and 3" bar capacity, over 16.93" of swing and a 25.59" max cutting length.
The Mazak Multiplex 6300, also searched as Mazak Multiplex-6300, Multiplex 6300, and Mazak Multiplex, is a twin-spindle, twin-turret CNC turning center with live tooling and gantry loading (multi-axis lathe).
This 2010 machine has 12.2" of X-axis and 23.82" of Z-axis travel on each side, with 945 IPM rapids, A2-8 spindle noses with 3.46" bores, and 441.34 ft-lbs of spindle torque. It also comes equipped with automatic tool eyes, synchronous tapping, chuck air blast, and a rear disposal chip conveyor, with an approximate floor space of 95.3" x 167.7" (without automation), an approximate height of 82.68", and an approximate weight of 25,740 lbs.
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| Swing | 16.93" |
| Machining Length | 25.59" |
| Chuck Size | 12" |
| Bar Capacity | 3" |
| Power | 30 hp |
| Max RPM | 4,000 RPM |
| Turning Dia | 16.93" |
| Tailstock | 'No' |
| Live Tooling | 'Yes' |
| Sub Spindle | 'Yes' |
| Control | CNC (Mazatrol Fusion 640T) |
Standard Cutting Diameter: 13.0"
Maximum Cutting Length Chuckwork: 8.86"
Distance Between Spindle Faces (Max / Min): 57.09" / 9.82"
Spindle Nose: A2-8
Spindle Bore: 3.46"
Spindle Indexing (C-Axis): .001 deg. / 360,000 Positions
Spindle Torque: 441.34 ft-lbs
Type of Turrets: Dodecagonal/Drum Non-Lift
Tool Holder Shanks: Modified VDI
Turret Index Time (1 Step): 0.3 Sec
Total Number of Tools: 24 (12 x 2)
Tool Size Turning & Facing: 1" x 1"
Boring Bar Maximum Diameter: 2"
Mill Spindle Speed: 4,000 RPM
Mill Spindle Horsepower (10 Min): 10 HP
Mill Spindle Torque (4,000 RPM): 57.88 ft-lbs
Maximum Drill: 7/8"
Maximum End Mill: 13/16"
Maximum Tap: 8- 5/8 UNC
X-Axis Travel (L&R): 12.2"
Z-Axis Travel (L&R): 23.82"
Rapid Traverse X-Axis: 945 IPM
Rapid Traverse Z-Axis: 945 IPM
C-Axis Rapid: 400 RPM
Total Power Required (Machine Only): 68 kVA
Air Requirements: 71 PSI / 14 CFM
Approximate Floor Space (Without Automation or Bar Feeder): 95.3" x 167.7"
Approximate Height: 82.68"
Approximate Weight (Machine Only): 25,740 lbs
Gantry Robot Max Workpiece Weight: 44 lbs x 2
Gantry Robot Body Traverse Speed: 4,728 IPM
Gantry Robot Arm Up/Down Speed: 2,364 IPM
Gantry Robot Max Workpiece Size: 11.81" Dia. x 5.91" L
Pitch Feed Conveyor Pallets: 6
GL200F Gantry Robot with Type III Pitch Feed Conveyor
12" Chucks on Both Spindles
12 Position Drum Turrets L&R (VDI Straight Shank)
Rotary-Tool Spindles L&R
C-Axis 0.001 Degree Incr. L&R
Automatic Tool Eye L&R
Milling Spindle Synchronous Tapping L&R
Relocation Device
Chuck Air Blast L&R
Chip Conveyor Rear Disposal (Hinge Type)
We use cookies to improve your experience. Privacy Policy.