Tongtai TCS-2000II CNC Lathe with Programmable Tailstock
Have one to sell?
ConditionUsed
1 available
This Tongtai TCS-2000II CNC lathe has a 12-station servo turret, a hydraulic programmable tailstock, and a Fanuc 0i-TF Plus control. It offers 20.47" of swing, an 11.8" turning diameter, an 8" hydraulic chuck, 2.01" bar capacity, and a 20 HP spindle with up to 4,500 RPM.
Swing Over Carriage: 12.6"
X-Axis Travel: 5.9" (+0.787" with 12-Station Turret)
Z-Axis Travel: 15.75"
Spindle Nose: A2-6
Hole Through Spindle: 2.4"
Spindle Bearing Diameter: 3.9"
Spindle Inside Taper: MT#5
Turret Stations: 12
OD Tool Shank Size: 1"
ID Tool Shank Size: 1.25"
Turret Index Time: 0.23 Seconds / 0.56 Seconds 180°
Tailstock Quill Diameter: 2.95"
Tailstock Quill Stroke: 3.94"
Tailstock Quill Taper: MT#4
Tailstock Body Travel (Manual): 10.8"
Rapid Traverse (X/Z): 1,181 / 1,181 IPM
Cutting Feed Rate: 0.0001 to 19.7 IPR
Fanuc 0i-TF Plus Control with 10.4" LCD
Servo Turret
3-Jaw Hydraulic Chuck
Hydraulic Programmable Tailstock Quill
Chain Type Chip Conveyor with Trolley
Bar Feeder Interface
Oil Skimmer
Manual Tool Presetter
Coolant System
Splash Guards
Built-In Work Light
Soft Jaws (1 Set)
Heat Exchanger for Electrical Cabinet
Workpiece Counter
OD Tool Holders (2)
OD Tool Holder Gaskets (6)
ID Tool Holders (4)
Boring Bar Sleeves (5): 3/8", 1/2", 5/8", 3/4", 1"
Drill Sleeves (3): MT#1, MT#2, MT#3
Live Center (1): MT#4
This Tongtai TCS-2000II CNC lathe has a 12-station servo turret, a hydraulic programmable tailstock, and a Fanuc 0i-TF Plus control. It offers 20.47" of swing, an 11.8" turning diameter, an 8" hydraulic chuck, 2.01" bar capacity, and a 20 HP spindle with up to 4,500 RPM.
The Tongtai TCS-2000II, also searched as TCS2000II, TCS-2000 II, TCS 2000, or TCS-2000, is a CNC turning center.
It has 5.9" of X-axis travel (plus 0.787" with the 12-station turret), 15.75" of Z-axis travel, and rapids of 1,181 IPM on both axes, with an A2-6 spindle nose and a 2.4" hole through the spindle. It comes equipped with a chain type chip conveyor with trolley, a bar feeder interface, an oil skimmer, a manual tool presetter, soft jaws, and a tooling package of OD and ID holders, boring bar sleeves, drill sleeves, and a live center.
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| Swing | 20.47" |
| Machining Length | 19.7" |
| # Axis | 2 |
| Chuck Size | 8" |
| Bar Capacity | 2.01" |
| Power | 20 hp |
| Max RPM | 4,500 RPM |
| Turning Dia | 11.8" |
| Tailstock | Yes |
| Control | CNC (Fanuc) |
Swing Over Carriage: 12.6"
X-Axis Travel: 5.9" (+0.787" with 12-Station Turret)
Z-Axis Travel: 15.75"
Spindle Nose: A2-6
Hole Through Spindle: 2.4"
Spindle Bearing Diameter: 3.9"
Spindle Inside Taper: MT#5
Turret Stations: 12
OD Tool Shank Size: 1"
ID Tool Shank Size: 1.25"
Turret Index Time: 0.23 Seconds / 0.56 Seconds 180°
Tailstock Quill Diameter: 2.95"
Tailstock Quill Stroke: 3.94"
Tailstock Quill Taper: MT#4
Tailstock Body Travel (Manual): 10.8"
Rapid Traverse (X/Z): 1,181 / 1,181 IPM
Cutting Feed Rate: 0.0001 to 19.7 IPR
Fanuc 0i-TF Plus Control with 10.4" LCD
Servo Turret
3-Jaw Hydraulic Chuck
Hydraulic Programmable Tailstock Quill
Chain Type Chip Conveyor with Trolley
Bar Feeder Interface
Oil Skimmer
Manual Tool Presetter
Coolant System
Splash Guards
Built-In Work Light
Soft Jaws (1 Set)
Heat Exchanger for Electrical Cabinet
Workpiece Counter
OD Tool Holders (2)
OD Tool Holder Gaskets (6)
ID Tool Holders (4)
Boring Bar Sleeves (5): 3/8", 1/2", 5/8", 3/4", 1"
Drill Sleeves (3): MT#1, MT#2, MT#3
Live Center (1): MT#4
We use cookies to improve your experience. Privacy Policy.