1999 Mazak Dual Turn 20 Twin Spindle CNC Lathe
Have one to sell?
ConditionUsed
1 available
This 1999 Mazak Dual Turn 20 twin-spindle CNC lathe has two 12-position drum turrets, automatic workpiece transfer, and automatic tool eyes on both sides, run by a Mazatrol Fusion 640T control. It carries two 8" 3-jaw hydraulic chucks with a 20 HP spindle motor reaching 5,000 RPM, 2" bar capacity, 12.6" of swing, and a 10" max cutting diameter.
Distance Between Spindle Faces: 49.21"
Travel X-Axis Turret 1 / Turret 2: 9.06" / 9.06"
Travel Z-Axis Turret 1 / Turret 2: 19.69" / 19.69"
Spindle Nose: A2-6
Spindle Bore: 2.4"
Spindle Torque: 246 ft-lbs
Number of Turrets: (2) 12 Position Drum
Rapid Traverse Rates X/Z: 1,200 IPM / 1,300 IPM
Approximate Dimensions (L x W x H): 141" x 73" x 81"
Approximate Weight: 15,000 lbs
(2) 8" 3 Jaw Hydraulic Chucks
Automatic Workpiece Transfer
Automatic Tool Eye (L&R)
Rear Exit Chip Conveyor
Parts Catcher / Parts Exit Conveyor
Coolant System with Tank & Pump
RS 232 Port Interface
This 1999 Mazak Dual Turn 20 twin-spindle CNC lathe has two 12-position drum turrets, automatic workpiece transfer, and automatic tool eyes on both sides, run by a Mazatrol Fusion 640T control. It carries two 8" 3-jaw hydraulic chucks with a 20 HP spindle motor reaching 5,000 RPM, 2" bar capacity, 12.6" of swing, and a 10" max cutting diameter.
The Mazak Dual Turn 20, also searched as Mazak Dualturn 20, Dual Turn-20, DT-20, and Dual Turn, is a twin-spindle, twin-turret CNC turning center (multi-axis lathe).
This 1999 machine has 9.06" of X-axis and 19.69" of Z-axis travel on each turret, with rapid rates of 1,200 IPM on X and 1,300 IPM on Z, 49.21" between spindle faces, an A2-6 spindle nose, a 2.4" spindle bore, and 246 ft-lbs of spindle torque. It comes equipped with a rear exit chip conveyor, parts catcher and parts exit conveyor, coolant system with tank and pump, and RS 232 port interface, with approximate dimensions of 141" x 73" x 81" and an approximate weight of 15,000 lbs.
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| Swing | 12.6" |
| Machining Length | 5.91" |
| Chuck Size | 8" |
| Bar Capacity | 2" |
| Power | 20 hp |
| Max RPM | 5,000 RPM |
| Turning Dia | 10" |
| Tailstock | 'No' |
| Sub Spindle | 'Yes' |
| Control | CNC (MAZATROL PC FUSION 640T) |
Distance Between Spindle Faces: 49.21"
Travel X-Axis Turret 1 / Turret 2: 9.06" / 9.06"
Travel Z-Axis Turret 1 / Turret 2: 19.69" / 19.69"
Spindle Nose: A2-6
Spindle Bore: 2.4"
Spindle Torque: 246 ft-lbs
Number of Turrets: (2) 12 Position Drum
Rapid Traverse Rates X/Z: 1,200 IPM / 1,300 IPM
Approximate Dimensions (L x W x H): 141" x 73" x 81"
Approximate Weight: 15,000 lbs
(2) 8" 3 Jaw Hydraulic Chucks
Automatic Workpiece Transfer
Automatic Tool Eye (L&R)
Rear Exit Chip Conveyor
Parts Catcher / Parts Exit Conveyor
Coolant System with Tank & Pump
RS 232 Port Interface
We use cookies to improve your experience. Privacy Policy.