2023 SODICK VN 400Q

X-Axis Travel - 15.75" (400 mm)
Y-Axis Travel - 11.81" (300 mm)
Z-Axis Travel - 9.06" (230 mm)
U-Axis Travel - 3.54"' (90 mm)
V-Axis Travel - 3.54"' (90 mm)
Axis Drive (X, Y, U, V) - Rigid Precision Linear Motors
Axis Feedback System (X, Y, U, V) - Glass Scales (Fully Closed Loop)
Max. Taper Angle - + 15° (At 4.72" thickness / 120 mm)
Simultaneously Controlled Axes - Max. 4 axes
Rapid Table Feed Rate - 94.5"/min (2,400 mm/min)
Jog Feed Rate - Max. 118" /min (3 m/min)
Program Dry-Run Feed Rate - 94.5"/min (2,400 mm/min)
Wire Diameter Range (Min. ~ Max.) * - ф 0.004" ~ 0.012" (0.10 ~ 0.30 mm)
Wire Feed Rate - Max. 984"/min (25 m/min)
Wire Guide (Lower) - Round Diamond Guide
Wire Guide (Upper) - Round Diamond Guide
Work Tank Dimensions (W x D) - 33.85" x 29.13" (860 x 740 mm)
Maximum Workpiece Weight - 1,102 lb (500 kg)
Distance from Floor to Table Top - 38.19"' (970 mm)
Wire-Feed Speed (Max.) - 16.5"/sec (420 mm/sec)
Wire-Tension Range (Min. ~ Max.) - 3 ~ 23 N (200 g ~ 2,800 g)
Wire Bobbin Weight - 17.6 lb (8 kg)
Machining Method - Flushing, Submerged
Machine Tool Weight (Including Power Supply & Tank) - 5,952 |b (2,700 kg)
External Dimensions (W x D x H) - 81.50" x 115.56" x 84.06" (2,070 x 2,935 x 2,135 mm)
Required Floor Space - 107.87" x 149.02" (2,740 x 3,785 mm)
Positioning X & Y Axis - 0.00012" (0.003 mm)
Repeatability X & Y Axis - 0.00004" (0.001 mm)
Air Flow Rate - 30 NL/min (1.1 CFM)
Air Pressure - 0.5 MPa (72 psi)
Tank Capacity - 167.75 gallons (635 liters)