2017 OKUMA GENOS L300MYW-E
Have one to sell?
ConditionUsed
1 available
CNC lathe available. Equipped with OSP P300LA-e CNC, sub spindle, live milling, and Y/C-axis. Main spindle: 10" chuck, 20 HP, 3,000 RPM. Sub spindle: 6" chuck, 10 HP, 6,000 RPM. Dimensions: 128" x 72" x 73".
SWING OVER BED 20.47"
MAX CUTTING DIAMETER 15.35"
MAX CUTTING LENGTH 13.99"
X-AXIS TRAVEL 9.25"
Y-AXIS TRAVEL Yes
Y-AXIS TRAVEL 3.93" (+1.965"/-1.965")
Z-AXIS TRAVEL 18.11"
CHUCK SIZE 10"
BAR CAPACITY 2.75"
SPINDLE BORE 3.15"
SPINDLE NOSE A2-8
SPINDLE MOTOR 20 HP
SPINDLE SPEED 3,000 RPM
RAPID TRAVERSE RATE - X-AXIS 787 in/min.
RAPID TRAVERSE RATE - Y-AXIS 394 in/min.
RAPID TRAVERSE RATE - Z-AXIS 984 in/min.
SUB SPINDLE Yes
SUB SPINDLE - CHUCK SIZE 6"
SUB SPINDLE - BAR CAPACITY 1.69"
SUB SPINDLE - SPINDLE BORE 2.08"
SUB SPINDLE - SPINDLE NOSE 140MM FLAT NOSE
SUB SPINDLE - SPINDLE MOTOR 10 hp
SUB SPINDLE - SPINDLE SPEED 6,000 RPM
SUB SPINDLE / W-AXIS TRAVEL 20.47"
TURRET CAPACITY 12 STATION
TURRET TYPE BOLT-ON
LIVE MILLING Yes
LIVE MILLING SPEED 6,000 RPM
LIVE MILLING MOTOR 7.5 HP
DIMENSIONS 128" X 72" X 73"
WEIGHT 11,976 LBS
OSP P300LA-e CNC
SUB SPINDLE (W-AXIS)
Y-AXIS
C-AXIS
LIVE MILLING
10" HOLLOW 3-JAW HYDRAULIC CHUCK AND ACTUATOR PACKAGE WITH 10" KITAGAWA B210 3-JAW CHUCK ON MAIN SPINDLE
6" KITAGAWA B206 3-JAW HYDRAULIC CHUCK ON SUB SPINDLE
CHUCK AIR BLOW OPTION ON BOTH MAIN AND SUB
TOOL TOUCH SETTER (MANUAL TYPE)
SIDE DISCHARGE CHIP CONVEYOR
100 PSI OKUMA HIGH OUTPUT COOLANT SYSTEM
160GB HARD DISC
2GB RAM
ETHERNET PLUS (4) USB PORTS
HIGH TORQUE, HIGH RESPONSE MOTION CONTROL SYSTEM
ADVANCED ONE TOUCH IGF
HELICAL CUTTING
SPARE M CODES (4-SETS)
LAP 4
TOOL OFFSETS
USER TASK III - INCLUDED
ALL TOOLING SEEN IN TURRET PHOTO INCLUDED (TO BE VERIFIED BY BUYER):
(4) ADJUSTABLE ANGLE TOOL ER-32 EXTERNAL COOLANT
(2) AXIAL/FACE MAIN/SUB SPINDLE ER-32
(1) ID L300/L3000MW/MYW 1.5" & 1" MAIN & SUB SPINDLE
(1) OD I-S LB3000MYW 1" MAIN/SUB SPINDLE DOUBLE
ADDITIONAL TOOLING MAY INCLUDE (1) ADJUSTABLE ANGLE TOOL (FUNCTIONALITY UNCONFIRMED), AND (2) TURNING HOLDERS
HOURS ON MACHINE AS OF 11/15/2024 (AS PICTURED)
* RUNNING 6,713 HOURS
* OPERATING 3,912 HOURS
* CUTTING: 3,019 HOURS
* SPINDLE RUN: 2,312 HOURS
We use cookies to improve your experience. Privacy Policy.