1997 Okuma LT-10M Twin Turret CNC Lathe with Live Tooling
Have one to sell?
ConditionUsed
1 available
This 1997 Okuma LT-10M twin-spindle CNC lathe has two 12-position turrets, both with live tooling at up to 6,000 RPM and 3 HP, run by an Okuma OSP 7000L control. Both spindles reach 6,000 RPM with collet chucks and 1.6" bar capacity, with 15.75" of swing and an 8.27" max turning diameter.
Distance Between Noses: 37.80"
No. of Spindle Speed Ranges: Auto 2-Step VAC Motor Winding Changeover
Tools: 12 + 12
Diameter of OD Tool Shank: 0.79" x 0.79"
Diameter of ID Tool Shank: 1.26"
Spindle Bore: 2.09"
Spindle Nose: Flat
Rapid Traverse Rates (X/Z): 591/787 IPM
Milling Motor: 3 HP
Milling Speed: 100 - 6,000 RPM
X-Axis Travel (Both Turrets): 7.56"
ZA-Axis Travel (Upper Turret): 27.56"
ZB-Axis Travel (Lower Turret): 28.74"
C-Axis Travel: 360 Degree
Approximate Weight: 13,200 lbs
Approximate Dimensions: 120" x 82" x 71"
Okuma OSP 7000L Control
Collet Chuck on Left and Right Spindles
(2) 12 Position Turrets
Live Tool Capability on Both Turrets
Parts Catcher
Chip Conveyor
All Available Static & Live Tool Holders
This 1997 Okuma LT-10M twin-spindle CNC lathe has two 12-position turrets, both with live tooling at up to 6,000 RPM and 3 HP, run by an Okuma OSP 7000L control. Both spindles reach 6,000 RPM with collet chucks and 1.6" bar capacity, with 15.75" of swing and an 8.27" max turning diameter.
The Okuma LT-10M, also searched as Okuma LT10M, LT 10M, LT-10, and LT10, is a twin-spindle, twin-turret CNC turning center with live tooling (multi-axis lathe).
This 1997 machine has 7.56" of X-axis travel on both turrets, 27.56" of upper turret Z travel, and 28.74" of lower turret Z travel, with rapid rates of 591 IPM on X and 787 IPM on Z, 37.80" between spindle noses, and a 2.09" spindle bore. It comes equipped with a parts catcher, chip conveyor, and static and live tool holders, with approximate dimensions of 120" x 82" x 71" and an approximate weight of 13,200 lbs.
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| Swing | 15.75" |
| Machining Length | 5.12" |
| Chuck Size | 6" |
| Bar Capacity | 1.6" |
| Power | 10 hp |
| Max RPM | 6,000 RPM |
| Turning Dia | 8.27" |
| Tailstock | 'No' |
| Live Tooling | 'Yes' |
| Sub Spindle | 'Yes' |
| Control | CNC (OKUMA) |
| Dimensions | 120" X 82" X 71" |
| Weight | 13,200 LBS |
Distance Between Noses: 37.80"
No. of Spindle Speed Ranges: Auto 2-Step VAC Motor Winding Changeover
Tools: 12 + 12
Diameter of OD Tool Shank: 0.79" x 0.79"
Diameter of ID Tool Shank: 1.26"
Spindle Bore: 2.09"
Spindle Nose: Flat
Rapid Traverse Rates (X/Z): 591/787 IPM
Milling Motor: 3 HP
Milling Speed: 100 - 6,000 RPM
X-Axis Travel (Both Turrets): 7.56"
ZA-Axis Travel (Upper Turret): 27.56"
ZB-Axis Travel (Lower Turret): 28.74"
C-Axis Travel: 360 Degree
Approximate Weight: 13,200 lbs
Approximate Dimensions: 120" x 82" x 71"
Okuma OSP 7000L Control
Collet Chuck on Left and Right Spindles
(2) 12 Position Turrets
Live Tool Capability on Both Turrets
Parts Catcher
Chip Conveyor
All Available Static & Live Tool Holders
We use cookies to improve your experience. Privacy Policy.