2018 GANESH GENTURN 32-CS

Main Spindle:
Maximum RPM / spindle bearing 6,000 RPM / 5-bearing spindle, 3-front, 2-rear ø110mm

Spindle Motor 10-HP 3,000 rpm spindle motor, 2:1 pulley ratio

Collet Nose Brown & Sharpe #22 or Traub A-32

Drawtube Bore 1.456” (37mm)

Maximum Barstock Diameter 1.25” (32mm) standard 1.375” (36mm) with adapter

X-axis Travel 7.28” (185mm)

Y-axis Travel (true Y-axis, not compound Y) 19.29” (490mm)

Z-axis Travel 6.50” 165mm)

Rapid Travel Speed: X, Y, Z 1,181 IPM (30m /minute)

Minimum input unit 40 millionths (0.00004”) (0.01mm)

OD Turning Tool Positions 6 OD Tools (½” or 12mm) (5-5/8” tool plate available)

ID Turning Tool Positions 5 ID Tools

OD Turning Tool size ½” or 12mm (5/8” or 16mm Optional)

ID Turning Tool Bore Size 25 mm

Spindle Center Height 40” (1015mm)

Sub Spindle:

Sub spindle RPM / spindle bearing 6,000 RPM / 4-bearing Quad-Duplex pair configuration

Sub spindle Motor 5-HP 3,000 rpm spindle motor, 2:1 pulley ratio

Collet Nose Brown & Sharpe #22 or Traub A-32

Maximum Barstock Diameter 1.250” in collet chuck (1.080” (27.5mm) pass thru)

X-axis Travel 11.53” (293mm)

Z-axis Travel 11.61” (295mm)

Minimum input unit 0.0001” (0.001mm = 40 millionths inch)

ID Turning Tool Bore Size 25mm

Air Blast nozzle Included

Finished Parts Ejector Included, along with parts catcher & parts conveyor belt

Live Tooling: All live tools are gear driven w/ ø42mm bearings – no belts!

Cross slide live tools 4-ER-20 cross slide live tools, 4,000 rpm, 2.0 HP (1.5kw)

Front slide live tools 3-ER-20 front slide live tools, 4,000 rpm, 1.0 HP (0.75kw)

Live tool collet size ER-20 collet, Ø1/2” (0.5-13mm) tool shank capacity

Max RPM for live tools 4,000 RPM

(1 cross live tool can be substituted on subspindle tool block)

Machine Dimensions:

Machine Length 101” * (2420mm) ( * +36” for chip conveyor)

Machine Depth 68” (1500mm)

Machine Height 80” (1985mm)

Machine Weight 8,000lbs (3,628kgs)

Coolant Pump Dual 50psi 3/4-HP Coolant Pumps for main and subspindle

Coolant Tank Capacity 80-gallon coolant tank, with coolant flow confirmation sensor

Lubrication distribution Way lube distributed at 3-6 cc / 15-minute cycle

Machine Power Requirements 220vac ±5%, 63-amps, 3-phase, 60Hz

Air Requirements 85-PSI at 10-CFM for parts catcher, parts ejector, & air blast