This 2007 Fadal VMC 8030 VHT vertical machining center has a Fadal Multi Processor CNC control, a 30 HP high torque spindle motor with 10,000 RPM, and a 24-station automatic tool changer. It offers 80" x 30" x 30" of X, Y, and Z travel over an 82.5" x 30" table with a 3,751 lb capacity, with 400 IPM rapids.
Spindle Nose to Table: 5.5" - 35.5"
Rapid Traverse Rates (X, Y, Z): 400 IPM
Cutting Feedrate: 250 IPM
T-Slots: 5, 5/8" Width
Max Table Load: 3,751 lbs
Max Tool Weight: 15 lbs
Max Tool Diameter: 6"
Max Tool Length: 15"
Air Required: 80 PSI, 4 SCFM
Power: 240V / 3-Phase / 60 Hz / 37 kVA
Approximate Weight: 18,000 lbs
Fadal Multi Processor CNC Control
Box Way Construction
4th Axis Ready
Through Spindle Coolant Ready
MPG Hand Wheel Control
Rigid Tapping
Telescopic Way Covers
Coolant System
Chiller Unit
This 2007 Fadal VMC 8030 VHT vertical machining center has a Fadal Multi Processor CNC control, a 30 HP high torque spindle motor with 10,000 RPM, and a 24-station automatic tool changer. It offers 80" x 30" x 30" of X, Y, and Z travel over an 82.5" x 30" table with a 3,751 lb capacity, with 400 IPM rapids.
The Fadal VMC 8030 VHT, also searched as Fadal VMC8030 VHT, VMC-8030VHT, 8030 VHT, VMC 8030, or Fadal 8030, is a 3-axis vertical machining center (VMC) with a high torque spindle.
It has a cutting feed rate of 250 IPM, 5.5" to 35.5" from spindle nose to table, and five 5/8" T-slots. It comes equipped with box way construction, telescopic way covers, rigid tapping, an MPG hand wheel, a coolant system, a chiller unit, and 4th axis and through spindle coolant prep, with an approximate weight of 18,000 lbs.
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| X | 80" |
| Y | 30" |
| Z | 30" |
| Power | 30 hp |
| RPM | 10,000 RPM |
| # ATC | 24 |
| Table-W | 30" |
| Table-L | 82.5" |
| # Axis | 3 |
| Control | CNC (Fadal) |
Spindle Nose to Table: 5.5" - 35.5"
Rapid Traverse Rates (X, Y, Z): 400 IPM
Cutting Feedrate: 250 IPM
T-Slots: 5, 5/8" Width
Max Table Load: 3,751 lbs
Max Tool Weight: 15 lbs
Max Tool Diameter: 6"
Max Tool Length: 15"
Air Required: 80 PSI, 4 SCFM
Power: 240V / 3-Phase / 60 Hz / 37 kVA
Approximate Weight: 18,000 lbs
Fadal Multi Processor CNC Control
Box Way Construction
4th Axis Ready
Through Spindle Coolant Ready
MPG Hand Wheel Control
Rigid Tapping
Telescopic Way Covers
Coolant System
Chiller Unit
We use cookies to improve your experience. Privacy Policy.