This 2014 Okuma MA-550VB vertical machining center has a 30 HP, 6,000 RPM gear head spindle with a CAT 50 Big Plus taper, through spindle coolant, and a spindle chiller unit. It has 51.18" x 22.04" x 22.04" travels over a 51.18" x 22.04" table, with a 32-station side mount ATC and an Okuma OSP-P300M control.
X & Y Rapid Traverse: 1,575 IPM
Z Rapid Traverse: 1,181 IPM
Cutting Feed Rate: 1,181 IPM
Spindle Nose to Table: 7.87" to 29.92"
Number of T-Slots: 5
T-Slot Width: 0.7"
Max Table Load: 2,204 lbs
Max Tool Weight: 44 lbs
Max Tool Length: 15.74"
Max Tool Diameter: 5.31"
Air Required: 90 PSI, 4 SCFM
Power Requirement: 440V / 220V, 29.4 kVA, 3-Phase
Approximately 11,726 Cutting Hours
Approximate Dimensions: 126" x 112" x 114"
Approximate Weight: 29,960 lbs
Okuma OSP-P300M CNC Control
Gear Head Spindle
Big Plus Spindle
Side Mount ATC
Through Spindle Coolant
Spindle Chiller Unit
MPG Handwheel
USB Ports
Rigid Tapping
Coolant Tank
Chip Conveyor
Transformer
This 2014 Okuma MA-550VB vertical machining center has a 30 HP, 6,000 RPM gear head spindle with a CAT 50 Big Plus taper, through spindle coolant, and a spindle chiller unit. It has 51.18" x 22.04" x 22.04" travels over a 51.18" x 22.04" table, with a 32-station side mount ATC and an Okuma OSP-P300M control.
The Okuma MA-550VB, also searched as Okuma MA550VB, MA 550VB, or MA-550 VB, is a 50-taper CNC vertical machining center (VMC), also known as a CNC mill.
Rapid rates are 1,575 IPM on X and Y and 1,181 IPM on Z, with 7.87" to 29.92" from spindle nose to table and a max table load of 2,204 lbs. It also comes equipped with rigid tapping, a chip conveyor, coolant tank, transformer, MPG handwheel, and USB ports, and has approximately 11,726 cutting hours. Approximate dimensions are 126" x 112" x 114", with an approximate weight of 29,960 lbs.
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| X | 51.18" |
| Y | 22.04" |
| Z | 22.04" |
| Power | 30 hp |
| RPM | 6,000 RPM |
| # ATC | 32 |
| Taper | CAT-50 |
| Table-W | 22.04" |
| Table-L | 51.18" |
| # Axis | 3 |
| Control | CNC (OKUMA) |
X & Y Rapid Traverse: 1,575 IPM
Z Rapid Traverse: 1,181 IPM
Cutting Feed Rate: 1,181 IPM
Spindle Nose to Table: 7.87" to 29.92"
Number of T-Slots: 5
T-Slot Width: 0.7"
Max Table Load: 2,204 lbs
Max Tool Weight: 44 lbs
Max Tool Length: 15.74"
Max Tool Diameter: 5.31"
Air Required: 90 PSI, 4 SCFM
Power Requirement: 440V / 220V, 29.4 kVA, 3-Phase
Approximately 11,726 Cutting Hours
Approximate Dimensions: 126" x 112" x 114"
Approximate Weight: 29,960 lbs
Okuma OSP-P300M CNC Control
Gear Head Spindle
Big Plus Spindle
Side Mount ATC
Through Spindle Coolant
Spindle Chiller Unit
MPG Handwheel
USB Ports
Rigid Tapping
Coolant Tank
Chip Conveyor
Transformer
We use cookies to improve your experience. Privacy Policy.