This 2009 Haas EC-630 horizontal machining center comes with Renishaw probing, through spindle coolant, a full 4th axis rotary table, and a twin pallet changer with 24.8" x 24.8" pallets. Its 30 HP CAT-50 spindle runs up to 10,000 RPM with a 72-tool ATC, over 40" x 33" x 35" of X, Y, and Z travel.
Number of Pallets: 2 (Twin Pallets)
Max Pallet Load: 1,500 lbs
B-Axis Rotation: 360,000° Full Contouring
Max Tool Diameter: 4"
Max Tool Weight: 30 lbs
Rapid Traverse: 710 IPM
Electrical: 260V, 3-Phase
Approximately 921 Cycle Start Hours
Approximately 698 Feed Cutting Hours
Approximate Weight: 51,000 lbs
Approximate Dimensions: 275" x 144" x 140"
Full 4th Axis Rotary Table
Renishaw Probing
Through Spindle Coolant
Hennig Lift-Up Chip Conveyor
TombstoneCity Workholding Column
Macros
This 2009 Haas EC-630 horizontal machining center comes with Renishaw probing, through spindle coolant, a full 4th axis rotary table, and a twin pallet changer with 24.8" x 24.8" pallets. Its 30 HP CAT-50 spindle runs up to 10,000 RPM with a 72-tool ATC, over 40" x 33" x 35" of X, Y, and Z travel.
The Haas EC-630, also searched as Haas EC630 or EC 630, is a 4-axis horizontal machining center (HMC) with a twin pallet changer.
This 2009 machine has a 1,500 lb max pallet load and 710 IPM rapid traverse, and takes tools up to 4" in diameter and 30 lbs. It also comes with a Hennig lift-up chip conveyor, a TombstoneCity workholding column, and macros, with approximate dimensions of 275" x 144" x 140" and an approximate weight of 51,000 lbs.
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| X | 40" |
| Y | 33" |
| Z | 35" |
| Power | 30 hp |
| RPM | 10,000 RPM |
| # ATC | 72 |
| Taper | CAT-50 |
| Pallet-W | 24.8" |
| Pallet-L | 24.8" |
| # Axis | 4 |
| Control | CNC (HAAS) |
Number of Pallets: 2 (Twin Pallets)
Max Pallet Load: 1,500 lbs
B-Axis Rotation: 360,000° Full Contouring
Max Tool Diameter: 4"
Max Tool Weight: 30 lbs
Rapid Traverse: 710 IPM
Electrical: 260V, 3-Phase
Approximately 921 Cycle Start Hours
Approximately 698 Feed Cutting Hours
Approximate Weight: 51,000 lbs
Approximate Dimensions: 275" x 144" x 140"
Full 4th Axis Rotary Table
Renishaw Probing
Through Spindle Coolant
Hennig Lift-Up Chip Conveyor
TombstoneCity Workholding Column
Macros
We use cookies to improve your experience. Privacy Policy.