This 2010 Doosan DNM400 vertical machining center runs a Doosan-Fanuc i Series control and comes 4th axis ready, with a chip conveyor, chip auger, and spindle oil cooler. Its 20 HP, 8,000 RPM spindle is paired with a 30-station ATC, and travels are 30" x 17.1" x 20.1" over a 36.2" x 17.1" table.
Table Load Capacity: 1,322.8 lbs
Spindle Nose to Table: 5.9" to 26"
Spindle Center to Column: 20.2"
X-Axis Rapid Traverse: 1,417.3 IPM
Y-Axis Rapid Traverse: 1,417.3 IPM
Z-Axis Rapid Traverse: 1,181.1 IPM
Maximum Cutting Feed Rate: 590.6 IPM
Maximum Tool Length: 11.8"
Maximum Tool Weight: 17.6 lbs
Air Pressure Requirement: 78.3 PSI
Voltage: 220V
Phase: 3
Frequency: 50/60 Hz
Rated Power Capacity: 30.90 kVA
Full Load Current: 93.83 Amps
Approximate Dimensions: 82.4" x 103" x 106.4"
Approximate Weight: 11,023 lbs
Doosan-Fanuc i Series CNC Control
4th Axis Ready
Chip Conveyor
Chip Auger
Spindle Oil Cooler
Remote Jog Handle
Flood Coolant
Work Light
This 2010 Doosan DNM400 vertical machining center runs a Doosan-Fanuc i Series control and comes 4th axis ready, with a chip conveyor, chip auger, and spindle oil cooler. Its 20 HP, 8,000 RPM spindle is paired with a 30-station ATC, and travels are 30" x 17.1" x 20.1" over a 36.2" x 17.1" table.
The Doosan DNM400, also searched as Doosan DNM 400, DNM-400, or DN Solutions DNM400, is a 3-axis vertical machining center (VMC).
This 2010 machine has 5.9" to 26" from spindle nose to table, 20.2" from spindle center to column, and a 1,322.8 lb table load capacity. Rapids are 1,417.3 IPM on X and Y and 1,181.1 IPM on Z, with a max cutting feed rate of 590.6 IPM and tools up to 11.8" long and 17.6 lbs. It also comes with a remote jog handle, flood coolant, and work light, with approximate dimensions of 82.4" x 103" x 106.4" and an approximate weight of 11,023 lbs.
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| X | 30" |
| Y | 17.1" |
| Z | 20.1" |
| Power | 20 hp |
| RPM | 8,000 RPM |
| # ATC | 30 |
| Table-W | 17.1" |
| Table-L | 36.2" |
| # Axis | 3 |
| Control | CNC (Fanuc) |
Table Load Capacity: 1,322.8 lbs
Spindle Nose to Table: 5.9" to 26"
Spindle Center to Column: 20.2"
X-Axis Rapid Traverse: 1,417.3 IPM
Y-Axis Rapid Traverse: 1,417.3 IPM
Z-Axis Rapid Traverse: 1,181.1 IPM
Maximum Cutting Feed Rate: 590.6 IPM
Maximum Tool Length: 11.8"
Maximum Tool Weight: 17.6 lbs
Air Pressure Requirement: 78.3 PSI
Voltage: 220V
Phase: 3
Frequency: 50/60 Hz
Rated Power Capacity: 30.90 kVA
Full Load Current: 93.83 Amps
Approximate Dimensions: 82.4" x 103" x 106.4"
Approximate Weight: 11,023 lbs
Doosan-Fanuc i Series CNC Control
4th Axis Ready
Chip Conveyor
Chip Auger
Spindle Oil Cooler
Remote Jog Handle
Flood Coolant
Work Light
We use cookies to improve your experience. Privacy Policy.