This 2012 Doosan DNM400 vertical machining center comes with a 4th axis rotary, a Doosan-Fanuc i Series control, and a chip conveyor. It offers 30" x 17.1" x 20.1" travels over a 36.2" x 17.1" table rated for 1,322.8 lbs, with X and Y rapids of 1,417.3 IPM.
Table Load Capacity: 1,322.8 lbs
Spindle Nose to Table: 5.9" to 26"
Spindle Center to Column: 20.2"
X-Axis Rapid Traverse: 1,417.3 IPM
Y-Axis Rapid Traverse: 1,417.3 IPM
Z-Axis Rapid Traverse: 1,181.1 IPM
Maximum Cutting Feed Rate: 590.6 IPM
Maximum Tool Length: 11.8"
Maximum Tool Weight: 17.6 lbs
Coolant Tank Capacity: 79.3 Gal
Air Pressure Requirement: 78.3 PSI
Voltage: 220V
Phase: 3
Frequency: 50/60 Hz
Rated Power Capacity: 30.90 kVA
Full Load Current: 93.83 Amps
Approximate Dimensions: 82.4" x 103" x 106.4"
Approximate Weight: 11,023 lbs
Doosan-Fanuc i Series CNC Control
Chip Conveyor
Spindle Oil Cooler
Remote Jog Handle
Flood Coolant
Work Light
This 2012 Doosan DNM400 vertical machining center comes with a 4th axis rotary, a Doosan-Fanuc i Series control, and a chip conveyor. It offers 30" x 17.1" x 20.1" travels over a 36.2" x 17.1" table rated for 1,322.8 lbs, with X and Y rapids of 1,417.3 IPM.
The Doosan DNM400, also searched as Doosan DNM 400, DNM-400, or DN Solutions DNM400, is a 4-axis vertical machining center (VMC).
This 2012 machine has 5.9" to 26" from spindle nose to table, 20.2" from spindle center to column, a Z-axis rapid of 1,181.1 IPM, and a max cutting feed rate of 590.6 IPM. It takes tools up to 11.8" long and 17.6 lbs, and comes equipped with a spindle oil cooler, flood coolant with a 79.3 gallon tank, remote jog handle, and work light, with approximate dimensions of 82.4" x 103" x 106.4" and an approximate weight of 11,023 lbs.
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| X | 30" |
| Y | 17.1" |
| Z | 20.1" |
| Table-W | 17.1" |
| Table-L | 36.2" |
| # Axis | 4 |
| Control | CNC (Fanuc) |
Table Load Capacity: 1,322.8 lbs
Spindle Nose to Table: 5.9" to 26"
Spindle Center to Column: 20.2"
X-Axis Rapid Traverse: 1,417.3 IPM
Y-Axis Rapid Traverse: 1,417.3 IPM
Z-Axis Rapid Traverse: 1,181.1 IPM
Maximum Cutting Feed Rate: 590.6 IPM
Maximum Tool Length: 11.8"
Maximum Tool Weight: 17.6 lbs
Coolant Tank Capacity: 79.3 Gal
Air Pressure Requirement: 78.3 PSI
Voltage: 220V
Phase: 3
Frequency: 50/60 Hz
Rated Power Capacity: 30.90 kVA
Full Load Current: 93.83 Amps
Approximate Dimensions: 82.4" x 103" x 106.4"
Approximate Weight: 11,023 lbs
Doosan-Fanuc i Series CNC Control
Chip Conveyor
Spindle Oil Cooler
Remote Jog Handle
Flood Coolant
Work Light
We use cookies to improve your experience. Privacy Policy.