This 2022 Makino F5 vertical machining center runs a 30,000 RPM spindle with 29.5 HP, a 30-tool ATC, and a Renishaw OMP400 probe with an NC4+ Blue tool setter. It has 35.4" of X travel, 19.7" of Y, and 17.7" of Z, with scale feedback on all three axes and a Makino Professional 6 control.
Maximum Workpiece: 39.4" x 19.7" x 17.7"
Maximum Payload: 2,204 lbs
Rapid Traverse: 787 IPM
Cutting Feedrate: 787 IPM
Approximate Weight: 17,000 lbs
Makino Professional 6 CNC Control
HSK-63 Spindle Interface
Turmoil OC-100 Coolant Chiller
ChipBlaster FP2 Coolant Filter
Workpiece Wash Gun
Jorgensen Scraper Chip Conveyor, Left Discharge
Renishaw OMP400 Probe and NC4+ Blue Tool Setter Combo
Equipment Stand (Spindle Oil Temp Controller, Transformers)
Program Storage Increase to 2MB
I/O Expansion Module No. 3
Eight Digit Tool Codes
Scale Feedback on X, Y, Z
Nozzle Coolant
Coolant Tank Rear
Automatic Air Blow
Through Spindle Air
Coolant Level Detection Sensor
Splashguard Door Interlock with Lock
Centralized Auto Grease
Auto Power Out
Signal Light 3-Layer
Portable Manual Pulse Generator
Energy Saving Function
Linear Interpolation
Circular Interpolation
Helical Interpolation
Linear Rapid Interpolation
Feedrate Override Cancel
Background Editing
DNC Operation
Programmable Spindle Orientation
Tool Offsets - Pairs
High Speed Skip Function
Coordinate System Rotation
Rigid Tapping
Custom Macro
Rigid Tapping Retract
This 2022 Makino F5 vertical machining center runs a 30,000 RPM spindle with 29.5 HP, a 30-tool ATC, and a Renishaw OMP400 probe with an NC4+ Blue tool setter. It has 35.4" of X travel, 19.7" of Y, and 17.7" of Z, with scale feedback on all three axes and a Makino Professional 6 control.
The Makino F5, also searched as Makino F-5, F5 Pro 6, or F5 VMC, is a 3-axis vertical machining center (VMC).
This 2022 machine handles a maximum workpiece of 39.4" x 19.7" x 17.7" and a maximum payload of 2,204 lbs, with rapid and cutting feedrates of 787 IPM. It comes equipped with a Turmoil OC-100 coolant chiller, ChipBlaster FP2 coolant filter, Jorgensen scraper chip conveyor with left discharge, workpiece wash gun, through spindle air, automatic air blow, centralized auto grease, and a 3-layer signal light, with an approximate weight of 17,000 lbs.
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| X | 35.4" |
| Y | 19.7" |
| Z | 17.7" |
| Power | 29.5 hp |
| RPM | 30,000 RPM |
| # ATC | 30 |
| Table-W | 19.7" |
| Table-L | 39.4" |
| # Axis | 3 |
| Control | CNC (MAKINO) |
Maximum Workpiece: 39.4" x 19.7" x 17.7"
Maximum Payload: 2,204 lbs
Rapid Traverse: 787 IPM
Cutting Feedrate: 787 IPM
Approximate Weight: 17,000 lbs
Makino Professional 6 CNC Control
HSK-63 Spindle Interface
Turmoil OC-100 Coolant Chiller
ChipBlaster FP2 Coolant Filter
Workpiece Wash Gun
Jorgensen Scraper Chip Conveyor, Left Discharge
Renishaw OMP400 Probe and NC4+ Blue Tool Setter Combo
Equipment Stand (Spindle Oil Temp Controller, Transformers)
Program Storage Increase to 2MB
I/O Expansion Module No. 3
Eight Digit Tool Codes
Scale Feedback on X, Y, Z
Nozzle Coolant
Coolant Tank Rear
Automatic Air Blow
Through Spindle Air
Coolant Level Detection Sensor
Splashguard Door Interlock with Lock
Centralized Auto Grease
Auto Power Out
Signal Light 3-Layer
Portable Manual Pulse Generator
Energy Saving Function
Linear Interpolation
Circular Interpolation
Helical Interpolation
Linear Rapid Interpolation
Feedrate Override Cancel
Background Editing
DNC Operation
Programmable Spindle Orientation
Tool Offsets - Pairs
High Speed Skip Function
Coordinate System Rotation
Rigid Tapping
Custom Macro
Rigid Tapping Retract
We use cookies to improve your experience. Privacy Policy.