This 2022 Haas TM-0P comes with a 4th axis rotary table, a Renishaw probe, and approximately 337 cutting hours. It has 20" x 12" x 16" travels on a 38.4" x 10.5" table, with a 10-tool carousel changer and a 7.5 HP spindle that tops out at 6,000 RPM.
Approximately 337 Cutting Hours
Spindle Torque: 33 ft-lbf @ 1,200 RPM
Drive System: Direct Speed, Belt Drive
Spindle Nose to Table: 4" to 20"
Max Weight on Table: 350 lbs
T-Slots: 3
Rapids (X, Y, Z): 400 IPM
Max Cutting Feedrate: 400 IPM
Tool Changer Type: Carousel
Max Tool Diameter: 3.5"
Max Tool Weight: 12 lbs
Tool-to-Tool: 5.7 sec
Chip-to-Chip: 6.5 sec
Approximate Shipping Dimensions: 100" x 78" x 99.5"
Approximate Weight: 3,660 lbs
4th Axis Rotary Table
Renishaw Probe
Coolant
High Speed Machining
Rigid Tapping
Visual Programming
This 2022 Haas TM-0P comes with a 4th axis rotary table, a Renishaw probe, and approximately 337 cutting hours. It has 20" x 12" x 16" travels on a 38.4" x 10.5" table, with a 10-tool carousel changer and a 7.5 HP spindle that tops out at 6,000 RPM.
The Haas TM-0P, also searched as Haas TM0P, TM 0P, or Haas Toolroom Mill TM-0P, is a CNC toolroom mill and vertical machining center (VMC).
This 2022 machine has 400 IPM rapids on all three linear axes, 33 ft-lbf of spindle torque at 1,200 RPM, 4" to 20" from spindle nose to table, and a 350 lb max table load. It comes equipped with coolant, high speed machining, rigid tapping, and visual programming, with approximate shipping dimensions of 100" x 78" x 99.5" and an approximate weight of 3,660 lbs.
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| X | 20" |
| Y | 12" |
| Z | 16" |
| Power | 7.5 hp |
| RPM | 6,000 RPM |
| # ATC | 10 |
| Table-W | 10.5" |
| Table-L | 38.4" |
| # Axis | 4 |
| Control | CNC (HAAS) |
Approximately 337 Cutting Hours
Spindle Torque: 33 ft-lbf @ 1,200 RPM
Drive System: Direct Speed, Belt Drive
Spindle Nose to Table: 4" to 20"
Max Weight on Table: 350 lbs
T-Slots: 3
Rapids (X, Y, Z): 400 IPM
Max Cutting Feedrate: 400 IPM
Tool Changer Type: Carousel
Max Tool Diameter: 3.5"
Max Tool Weight: 12 lbs
Tool-to-Tool: 5.7 sec
Chip-to-Chip: 6.5 sec
Approximate Shipping Dimensions: 100" x 78" x 99.5"
Approximate Weight: 3,660 lbs
4th Axis Rotary Table
Renishaw Probe
Coolant
High Speed Machining
Rigid Tapping
Visual Programming
We use cookies to improve your experience. Privacy Policy.