2012 Milltronics RH35XP Vertical Machining Center with Probing
Have one to sell?
ConditionUsed
1 available
This 2012 Milltronics RH35XP vertical machining center comes with a Renishaw OPM 40-2 probe system and an Alberti T90-5 right-angle head with a flange adapter ring. It has 120" x 35" x 30" of X, Y, and Z travel over a 32" x 126" table, with a 24 HP, 8,000 RPM spindle and a 16-station tool changer.
Electrical: 220 Volt, 3-Phase, 50/60 Hz
Largest Amps: 100A
Full Load Current: 200A
Renishaw OPM 40-2 Probe System
Alberti T90-5 Right-Angle Head (50 Taper Input, 40 Taper Output, Flange Mount)
Flange Adapter Ring
This 2012 Milltronics RH35XP vertical machining center comes with a Renishaw OPM 40-2 probe system and an Alberti T90-5 right-angle head with a flange adapter ring. It has 120" x 35" x 30" of X, Y, and Z travel over a 32" x 126" table, with a 24 HP, 8,000 RPM spindle and a 16-station tool changer.
The Milltronics RH35XP, also searched as Milltronics RH 35XP, RH35 XP, RH-35XP, or RH35, is a 3-axis vertical machining center (VMC) with a 50 taper spindle.
This 2012 machine runs a Milltronics control. The Alberti right-angle head has a 50 taper input and a 40 taper output with a flange mount, and the machine runs on 220 volt, 3-phase power.
All specifications are approximate, provided by the seller, and subject to buyer verification
Imperial
| X | 120" |
| Y | 35" |
| Z | 30" |
| Power | 24 hp |
| RPM | 8,000 RPM |
| # ATC | 16 |
| Table-W | 32" |
| Table-L | 126" |
| # Axis | 3 |
| Control | CNC (MILLTRONICS) |
Electrical: 220 Volt, 3-Phase, 50/60 Hz
Largest Amps: 100A
Full Load Current: 200A
Renishaw OPM 40-2 Probe System
Alberti T90-5 Right-Angle Head (50 Taper Input, 40 Taper Output, Flange Mount)
Flange Adapter Ring
We use cookies to improve your experience. Privacy Policy.