2011 Haas VM-3 Vertical Machining Center with Probing
Have one to sell?
ConditionUsed
1 available
This 2011 Haas VM-3 vertical machining center comes with probing, programmable coolant, and 4th axis prewire, with 40" x 26" x 25" of X, Y, and Z travel over a 54" x 25" table. Its 30 HP inline direct-drive CAT 40 spindle runs up to 12,000 RPM, fed by a 24-station side-mount tool changer.
Max Table Load: 4,000 lbs
Spindle Nose to Table: 4" - 29"
Spindle Drive: Inline Direct Drive
Rapid Traverse X/Y/Z: 710 IPM
Max Cutting Feedrate: 500 IPM
Max Tool Diameter: 3" with adjacent pockets full, 5" with adjacent pockets empty
Max Tool Length: 13" from gauge line
Max Tool Weight: 12 lbs
Tool-to-Tool Change Time: Approximately 2.8 seconds
Coolant Capacity: 55 gallons
Air Requirement: 4 SCFM at 100 PSI
Probing
Programmable Coolant
4th Axis Prewire
Side-Mount Tool Changer
This 2011 Haas VM-3 vertical machining center comes with probing, programmable coolant, and 4th axis prewire, with 40" x 26" x 25" of X, Y, and Z travel over a 54" x 25" table. Its 30 HP inline direct-drive CAT 40 spindle runs up to 12,000 RPM, fed by a 24-station side-mount tool changer.
The Haas VM-3, also searched as Haas VM3 or VM 3, is a 3-axis vertical machining center (VMC), often called a mold-making VMC.
It has rapid traverse rates of 710 IPM on X, Y, and Z, a 500 IPM max cutting feedrate, 4" to 29" from spindle nose to table, and a 4,000 lb max table load. The tool changer takes tools up to 13" long and 12 lbs, and the machine has a 55-gallon coolant tank.
All specifications are approximate, provided by the seller, and subject to buyer verification
Imperial
| X | 40" |
| Y | 26" |
| Z | 25" |
| Power | 30 hp |
| RPM | 12,000 RPM |
| # ATC | 24 |
| Taper | CAT-40 |
| Table-W | 25" |
| Table-L | 54" |
| # Axis | 3 |
| Control | CNC (HAAS) |
Max Table Load: 4,000 lbs
Spindle Nose to Table: 4" - 29"
Spindle Drive: Inline Direct Drive
Rapid Traverse X/Y/Z: 710 IPM
Max Cutting Feedrate: 500 IPM
Max Tool Diameter: 3" with adjacent pockets full, 5" with adjacent pockets empty
Max Tool Length: 13" from gauge line
Max Tool Weight: 12 lbs
Tool-to-Tool Change Time: Approximately 2.8 seconds
Coolant Capacity: 55 gallons
Air Requirement: 4 SCFM at 100 PSI
Probing
Programmable Coolant
4th Axis Prewire
Side-Mount Tool Changer
We use cookies to improve your experience. Privacy Policy.