2002 Röders RP800 Vertical Machining Center with Factory Rebuild
Have one to sell?
ConditionUsed
1 available
This 2002 Röders RP800 vertical machining center was rebuilt by Röders of America with a control upgrade, new X, Y, and Z ballscrews, and new Y-axis guiderails and bearings. It has 31.5" x 23.6" x 15.7" of travel, a 35.4" x 27.6" table, a 23 HP spindle reaching 36,000 RPM, and a 30-tool ATC.
Spindle Taper: HSK E50
Max Table Load: 1,760 lbs
Feedrate: 2,362 IPM
Approximate Shipping Weight: 29,000 lbs
Approximate Shipping Dimensions: 118" L x 118" W x 126" H
Laser Tool Length Measuring Device
3D Touch Off Probe
Oil Mist Spray Cooling System
NC Milling Simulation Program
Auto Tool Cleaning Station
Re-Cutting Partial Program Software
Recent Service
Upgraded or replaced by Röders of America, Inc.:
Complete control upgrade, NT/RT replacement, and software upgraded to RMS6 version 5.24
New X, Y, and Z ballscrews
New Y-axis guiderails and bearings
New hydraulic pump
New electrical cabinet cooling unit
New chip auger motor
Spindle tested by Fischer USA
This 2002 Röders RP800 vertical machining center was rebuilt by Röders of America with a control upgrade, new X, Y, and Z ballscrews, and new Y-axis guiderails and bearings. It has 31.5" x 23.6" x 15.7" of travel, a 35.4" x 27.6" table, a 23 HP spindle reaching 36,000 RPM, and a 30-tool ATC.
The Röders RP800, also searched as Roeders RP800, Roders RP800, Röders Tec RP800, and RP 800, is a 3-axis vertical machining center (VMC).
This 2002 machine has a 2,362 IPM feedrate and a max table load of 1,760 lbs. It comes equipped with a laser tool length measuring device, a 3D touch off probe, oil mist spray cooling, an auto tool cleaning station, and NC milling simulation and re-cutting software. Its rebuild also included a new hydraulic pump, electrical cabinet cooling unit, and chip auger motor, with the spindle tested by Fischer USA. Approximate shipping dimensions are 118" L x 118" W x 126" H, with an approximate shipping weight of 29,000 lbs.
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| X | 31.5" |
| Y | 23.6" |
| Z | 15.7" |
| Power | 23 hp |
| RPM | 36,000 RPM |
| # ATC | 30 |
| Table-W | 27.6" |
| Table-L | 35.4" |
| # Axis | 3 |
| Control | CNC (RODERS) |
Spindle Taper: HSK E50
Max Table Load: 1,760 lbs
Feedrate: 2,362 IPM
Approximate Shipping Weight: 29,000 lbs
Approximate Shipping Dimensions: 118" L x 118" W x 126" H
Laser Tool Length Measuring Device
3D Touch Off Probe
Oil Mist Spray Cooling System
NC Milling Simulation Program
Auto Tool Cleaning Station
Re-Cutting Partial Program Software
Recent Service
Upgraded or replaced by Röders of America, Inc.:
Complete control upgrade, NT/RT replacement, and software upgraded to RMS6 version 5.24
New X, Y, and Z ballscrews
New Y-axis guiderails and bearings
New hydraulic pump
New electrical cabinet cooling unit
New chip auger motor
Spindle tested by Fischer USA
We use cookies to improve your experience. Privacy Policy.