2016 Mazak QTS 250 CNC Lathe
Have one to sell?
ConditionUsed
1 available
This 2016 Mazak QTS 250 CNC lathe runs a Mazatrol Smart control with a 12-position drum turret, tailstock, and automatic tool eye. It offers 24.04" of swing over the bed, a 13.78" max machining diameter, and an 18.73" max machining length, with a 10" hydraulic chuck, 3" bar capacity, a 35 HP main spindle, and up to 4,000 RPM.
X-Axis Travel: 8.76"
Z-Axis Travel: 20.26"
Rapid Traverse Rate (X and Z): 1,181 IPM
Spindle Nose: A2-8
Spindle Bore Diameter: 3.2"
Turret: 12-Position Drum Turret
Tailstock Center Taper: MT #4
Electrical: 208V / 3 Phase / 50/60 Hz / 40 kVA
Approximate Weight: 9,700 lbs
Kitagawa B-210 3-Jaw Hydraulic Chuck
Automatic Tool Setter (Tool Eye Probe)
Jorgensen Chip Conveyor
Tooling and tool holders are not included.
This 2016 Mazak QTS 250 CNC lathe runs a Mazatrol Smart control with a 12-position drum turret, tailstock, and automatic tool eye. It offers 24.04" of swing over the bed, a 13.78" max machining diameter, and an 18.73" max machining length, with a 10" hydraulic chuck, 3" bar capacity, a 35 HP main spindle, and up to 4,000 RPM.
The Mazak QTS 250, also searched as Mazak Quick Turn Smart 250, QTS-250, QTS250, and QT Smart 250, is a 2-axis CNC turning center.
This 2016 machine has 8.76" of X-axis travel and 20.26" of Z-axis travel, with rapid rates of 1,181 IPM on both axes. It has an A2-8 spindle nose, a 3.2" spindle bore, an MT #4 tailstock center taper, a Kitagawa B-210 hydraulic chuck, and a Jorgensen chip conveyor, with an approximate weight of 9,700 lbs.
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| Swing | 24.04" |
| Machining Length | 18.73" |
| # Axis | 2 |
| Chuck Size | 10" |
| Bar Capacity | 3" |
| Power | 35 hp |
| Max RPM | 4,000 RPM |
| Turning Dia | 13.78" |
| Control | CNC (Mazatrol Smart) |
X-Axis Travel: 8.76"
Z-Axis Travel: 20.26"
Rapid Traverse Rate (X and Z): 1,181 IPM
Spindle Nose: A2-8
Spindle Bore Diameter: 3.2"
Turret: 12-Position Drum Turret
Tailstock Center Taper: MT #4
Electrical: 208V / 3 Phase / 50/60 Hz / 40 kVA
Approximate Weight: 9,700 lbs
Kitagawa B-210 3-Jaw Hydraulic Chuck
Automatic Tool Setter (Tool Eye Probe)
Jorgensen Chip Conveyor
Tooling and tool holders are not included.
We use cookies to improve your experience. Privacy Policy.