2015 Hurco VMX42Ui 5-Axis Vertical Machining Center
Have one to sell?
ConditionUsed
1 available
This 2015 Hurco VMX42Ui 5-axis vertical machining center runs a trunnion table with +30°/-110° A-axis tilt and 360° C-axis rotation, along with Renishaw wireless spindle probing and tool presetting. It has 42" x 24" x 20.5" X/Y/Z travels, a 12,000 RPM CAT-40 spindle, a 40-tool ATC, and a Hurco WinMax dual-screen control.
A-Axis Travel: +30°/-110°
C-Axis Travel: 360°
Trunnion Table Diameter: 15.7"
Max Weight on Trunnion Table: 550 lbs
T-Slot Size: 6 x 0.48" x 60°
Spindle Nose to Table: 3.5" to 24"
Peak Spindle Motor: 20 HP
Spindle Torque (Peak, 1 Min): 176.1 ft-lbs at 720 RPM
Max Tool Diameter: 3"
Max Tool Length: 11.8"
Max Tool Weight: 15.4 lbs
Rapid Traverse X, Y, Z: 1,496, 1,496, 1,260 IPM
Rapid Traverse A, C: 25 RPM
Max Programmable Feedrate: 1,260 IPM
Approximate Shipping Weight: 15,752 lbs
Approximate Shipping Dimensions: 192" x 102" x 115"
Hurco WinMax Dual-Screen Control
Renishaw Wireless Tool Presetter and Spindle Probe
High Pressure Coolant Pump
Chip Conveyor
This 2015 Hurco VMX42Ui 5-axis vertical machining center runs a trunnion table with +30°/-110° A-axis tilt and 360° C-axis rotation, along with Renishaw wireless spindle probing and tool presetting. It has 42" x 24" x 20.5" X/Y/Z travels, a 12,000 RPM CAT-40 spindle, a 40-tool ATC, and a Hurco WinMax dual-screen control.
The Hurco VMX42Ui, also searched as Hurco VMX 42Ui, VMX42UI, VMX-42Ui, or VMX42 Ui, is a 5-axis trunnion-style vertical machining center (5-axis VMC).
It has a 15.7" trunnion table rated for 550 lbs, 3.5" to 24" from spindle nose to table, 176.1 ft-lbs of peak spindle torque at 720 RPM, and X/Y/Z rapids of 1,496, 1,496, and 1,260 IPM. It comes equipped with a high pressure coolant pump and chip conveyor, with an approximate shipping weight of 15,752 lbs and approximate shipping dimensions of 192" x 102" x 115".
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| X | 42" |
| Y | 24" |
| Z | 20.5" |
| # Axis | 5 |
| Power | 24 hp |
| RPM | 12,000 RPM |
| # ATC | 40 |
| Taper | CAT, BT, DIN 40 |
A-Axis Travel: +30°/-110°
C-Axis Travel: 360°
Trunnion Table Diameter: 15.7"
Max Weight on Trunnion Table: 550 lbs
T-Slot Size: 6 x 0.48" x 60°
Spindle Nose to Table: 3.5" to 24"
Peak Spindle Motor: 20 HP
Spindle Torque (Peak, 1 Min): 176.1 ft-lbs at 720 RPM
Max Tool Diameter: 3"
Max Tool Length: 11.8"
Max Tool Weight: 15.4 lbs
Rapid Traverse X, Y, Z: 1,496, 1,496, 1,260 IPM
Rapid Traverse A, C: 25 RPM
Max Programmable Feedrate: 1,260 IPM
Approximate Shipping Weight: 15,752 lbs
Approximate Shipping Dimensions: 192" x 102" x 115"
Hurco WinMax Dual-Screen Control
Renishaw Wireless Tool Presetter and Spindle Probe
High Pressure Coolant Pump
Chip Conveyor
We use cookies to improve your experience. Privacy Policy.