2015 Johnford SL-650A CNC Lathe
Have one to sell?
ConditionUsed
1 available
This 2015 Johnford SL-650A CNC lathe has a 12" 3-jaw chuck, a 4.05" bar capacity, and a 12-position turret with a tailstock, swinging 22.8" over a 60" center distance. It runs 25 HP and 3,500 RPM on a Fanuc 0i-TD control, with approximately 3,210 cutting hours.
X-Axis Travel: 9.8"
Z-Axis Travel: 55.1"
Turret Stations: 12
Electrics: 220V, 60 Hz, 160A
Approximately 3,210 Cutting Hours
Approximate Dimensions: 154" x 85" x 98"
Approximate Weight: 20,000 lbs
Fanuc 0i-TD CNC Control
3-Jaw Chuck
Coolant Tank
Chip Conveyor
(3) Boring Bar Holders
(4) Stick Tool Holders
This 2015 Johnford SL-650A CNC lathe has a 12" 3-jaw chuck, a 4.05" bar capacity, and a 12-position turret with a tailstock, swinging 22.8" over a 60" center distance. It runs 25 HP and 3,500 RPM on a Fanuc 0i-TD control, with approximately 3,210 cutting hours.
The Johnford SL-650A, also searched as Johnford SL650A, SL 650A, or SL-650, is a 2-axis CNC turning center.
This 2015 machine has 9.8" of X-axis travel and 55.1" of Z-axis travel. It comes equipped with a coolant tank, chip conveyor, three boring bar holders, and four stick tool holders, with approximate dimensions of 154" x 85" x 98" and an approximate weight of 20,000 lbs.
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| Swing | 22.8" |
| Machining Length | 66" |
| Chuck Size | 12" |
| Bar Capacity | 4.05" |
| Power | 35 hp |
| Max RPM | 3,000 RPM |
| Tailstock | Yes |
| Control | CNC (Fanuc) |
X-Axis Travel: 9.8"
Z-Axis Travel: 55.1"
Turret Stations: 12
Electrics: 220V, 60 Hz, 160A
Approximately 3,210 Cutting Hours
Approximate Dimensions: 154" x 85" x 98"
Approximate Weight: 20,000 lbs
Fanuc 0i-TD CNC Control
3-Jaw Chuck
Coolant Tank
Chip Conveyor
(3) Boring Bar Holders
(4) Stick Tool Holders
We use cookies to improve your experience. Privacy Policy.