2013 Ganesh GT44120 CNC Lathe with 6" Spindle Bore
Have one to sell?
ConditionUsed
1 available
This 2013 Ganesh GT44120 CNC lathe swings 44" over the bed and 27.60" over the cross slide, with a 6" spindle bore, an A2-11 spindle nose, and a 23.43" gap opening in front of the spindle face. It has a 30 HP spindle with speeds from 6 to 420 RPM, an 8-station turret, and approximately 5,000 hours.
Swing Over Cross Slide: 27.60"
Gap Opening Width: 23.43" in Front of Spindle Face
Distance Between Centers: 78" to 236" Available
Bed Width: 32"
Max Workpiece Weight (Chuck Only): 6,600 lbs
Max Workpiece Weight (Chuck and Steady Rest): 15,400 lbs
Max Workpiece Weight (Chuck, Steady Rest, and Tailstock): 19,800 lbs
Spindle Speed Range: 6 to 420 RPM
Spindle Bore: 6"
Spindle Nose: A2-11
Spindle ID Taper: MT-6
Cross Slide Travel: 23.62"
X and Z Rapid Feed Rate: 196 IPM
X and Z Cutting Feed Rate: 118 IPM
OD Tool Size: 1.25" x 1.25"
ID Tool Holder Bore: 1.97"
Approximately 5,000 Hours
Fanuc 0i-TD Control
8-Station Turret with Mix of ID and OD Tools
This 2013 Ganesh GT44120 CNC lathe swings 44" over the bed and 27.60" over the cross slide, with a 6" spindle bore, an A2-11 spindle nose, and a 23.43" gap opening in front of the spindle face. It has a 30 HP spindle with speeds from 6 to 420 RPM, an 8-station turret, and approximately 5,000 hours.
The Ganesh GT44120, also searched as Ganesh GT-44120, GT 44120, or Ganesh 44120, is a large swing CNC lathe (big bore turning center).
This 2013 machine has a 32" bed width and 23.62" of cross slide travel, with 196 IPM rapids and 118 IPM cutting feed on X and Z. It handles workpieces up to 6,600 lbs in the chuck alone, 15,400 lbs with a steady rest, and 19,800 lbs with a steady rest and tailstock, and takes 1.25" x 1.25" OD tools and 1.97" ID tool holders.
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| Swing | 44" |
| # Axis | 2 |
| Power | 30 hp |
| Max RPM | 420 RPM |
| Control | CNC (Fanuc) |
Swing Over Cross Slide: 27.60"
Gap Opening Width: 23.43" in Front of Spindle Face
Distance Between Centers: 78" to 236" Available
Bed Width: 32"
Max Workpiece Weight (Chuck Only): 6,600 lbs
Max Workpiece Weight (Chuck and Steady Rest): 15,400 lbs
Max Workpiece Weight (Chuck, Steady Rest, and Tailstock): 19,800 lbs
Spindle Speed Range: 6 to 420 RPM
Spindle Bore: 6"
Spindle Nose: A2-11
Spindle ID Taper: MT-6
Cross Slide Travel: 23.62"
X and Z Rapid Feed Rate: 196 IPM
X and Z Cutting Feed Rate: 118 IPM
OD Tool Size: 1.25" x 1.25"
ID Tool Holder Bore: 1.97"
Approximately 5,000 Hours
Fanuc 0i-TD Control
8-Station Turret with Mix of ID and OD Tools
We use cookies to improve your experience. Privacy Policy.