2017 Sugino VC15 Vertical Machining Center with Dual Workholding
Have one to sell?
ConditionUsed
1 available
This 2017 Sugino Self-Center VC15 vertical machining center is set up with dual workholding for synchronous machining, along with rigid tapping and a Toyooki hydraulic unit. It has a 12,000 RPM spindle rated 5 HP (15-minute), a 15-tool ATC with a 1.0 second tool change, 15.7" x 12.6" x 12.4" travels, and a 27.6" x 15.7" table.
Continuous Spindle Power: 2.9 HP
Max Tool Size: 2.36" x 7.87"
Max Tool Weight: 4.4 lbs (7.7 lbs with Low Speed ATC)
Tool Change Time: 1.0 Second
Rapid Feed X and Y: 945 IPM
Rapid Feed Z: 1,575 IPM
Cutting Feed Rate: 394 IPM
Power Capacity: 18 kVA
Air Pressure: 58 to 87 PSI
Air Consumption: 3.5 CFM
Noise Level: 75 dB(A) or Less
Approximate Dimensions: 118.1" x 68.7" x 113.4"
Approximate Weight: 9,920 lbs
Fanuc 0i-MD CNC Control
Dual Workholding
Synchronous Machining
Rigid Tap
English Operation Panel
Full Size Splash Guard with Auto Door, Ceiling, and Right to Left Slide Door
Mist Collector
Light Curtain SF4BH48V2
52.8 Gallon Coolant Tank with Two 1 HP Pumps, Base Cleaning Piping, Splash Gun, and Chip Tray
Additional Chip Tray with 0.5 HP Pump and Cleaning Piping
Chip Conveyor (Installed Inside Right Splash Guard)
Auto Lubrication for Ball Screw and Linear Guides
DUL Electrical Standard (Breaker, Wire, Electromagnetic Switch, Circuit Protectors)
Toyooki TP40NA-C3-D Hydraulic Unit
This 2017 Sugino Self-Center VC15 vertical machining center is set up with dual workholding for synchronous machining, along with rigid tapping and a Toyooki hydraulic unit. It has a 12,000 RPM spindle rated 5 HP (15-minute), a 15-tool ATC with a 1.0 second tool change, 15.7" x 12.6" x 12.4" travels, and a 27.6" x 15.7" table.
The Sugino Self-Center VC15, also searched as Sugino Self Center VC15, Selfcenter VC-15, or Sugino VC15, is a 3-axis VMC (vertical machining center).
This 2017 machine has 945 IPM rapids on X and Y and 1,575 IPM on Z, with a 394 IPM cutting feed rate. It comes equipped with a Fanuc 0i-MD control, a full splash guard with auto door, mist collector, light curtain, chip conveyor, a 52.8 gallon coolant tank with two 1 HP pumps, and auto lubrication, with approximate dimensions of 118.1" x 68.7" x 113.4" and an approximate weight of 9,920 lbs.
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| X | 15.7" |
| Y | 12.6" |
| Z | 12.4" |
| Power | 5 hp |
| RPM | 12,000 RPM |
| # ATC | 15 |
| Table-W | 15.7" |
| Table-L | 27.6" |
| # Axis | 3 |
| Control | CNC (Fanuc) |
Continuous Spindle Power: 2.9 HP
Max Tool Size: 2.36" x 7.87"
Max Tool Weight: 4.4 lbs (7.7 lbs with Low Speed ATC)
Tool Change Time: 1.0 Second
Rapid Feed X and Y: 945 IPM
Rapid Feed Z: 1,575 IPM
Cutting Feed Rate: 394 IPM
Power Capacity: 18 kVA
Air Pressure: 58 to 87 PSI
Air Consumption: 3.5 CFM
Noise Level: 75 dB(A) or Less
Approximate Dimensions: 118.1" x 68.7" x 113.4"
Approximate Weight: 9,920 lbs
Fanuc 0i-MD CNC Control
Dual Workholding
Synchronous Machining
Rigid Tap
English Operation Panel
Full Size Splash Guard with Auto Door, Ceiling, and Right to Left Slide Door
Mist Collector
Light Curtain SF4BH48V2
52.8 Gallon Coolant Tank with Two 1 HP Pumps, Base Cleaning Piping, Splash Gun, and Chip Tray
Additional Chip Tray with 0.5 HP Pump and Cleaning Piping
Chip Conveyor (Installed Inside Right Splash Guard)
Auto Lubrication for Ball Screw and Linear Guides
DUL Electrical Standard (Breaker, Wire, Electromagnetic Switch, Circuit Protectors)
Toyooki TP40NA-C3-D Hydraulic Unit
We use cookies to improve your experience. Privacy Policy.