2018 Toyoda FA800S Horizontal Machining Center with 120 ATC
Have one to sell?
ConditionUsed
1 available
This 2018 Toyoda FA800S horizontal machining center carries a 120-tool magazine, 1,000 PSI coolant through the spindle, and Renishaw spindle and laser tool probing on a full contouring B-axis. It runs a 6,000 RPM gear head CAT-50 Big Plus spindle at 60 HP with 936 ft-lbs of torque, and travels 53.15" x 45.28" x 45.28" over two 31.5" x 31.5" pallets.
Number of Pallets: 2
Pallet Change Time: 15 Seconds
Max Workpiece Height: 51.2"
Max Weight on Pallet: 5,511 lbs
B-Axis: 360° (Full NC Contouring Table)
Spindle Center to Pallet Top: 1.97" to 47.24"
Rapid Traverse Rate: 944 IPM
Cutting Feedrate Range: 0.04 to 944 IPM
Spindle Torque: 936 ft-lbs
Max Tool Diameter: 9.45"
Max Tool Weight: 77 lbs
Approximate Dimensions: 291" x 192" x 166"
Approximate Weight: 61,100 lbs
Fanuc 31i-Model B CNC Control
2MB Program Storage
300 Workpiece Coordinates
200 Pairs Tool Offsets
Gear Head Spindle
Big Plus Spindle
Renishaw RMP60 Spindle Probe
Renishaw NC4 Laser Tool Setter
Mayfran CS1 Scraper Type Chip Conveyor with 50-Micron Filter
1,000 PSI High-Pressure Coolant Through Spindle
Air Blow Through Tool
Overhead Coolant Shower
Handheld Washdown Gun at APC
This 2018 Toyoda FA800S horizontal machining center carries a 120-tool magazine, 1,000 PSI coolant through the spindle, and Renishaw spindle and laser tool probing on a full contouring B-axis. It runs a 6,000 RPM gear head CAT-50 Big Plus spindle at 60 HP with 936 ft-lbs of torque, and travels 53.15" x 45.28" x 45.28" over two 31.5" x 31.5" pallets.
The Toyoda FA800S, also searched as Toyoda FA-800S, FA 800S, FA800, or JTEKT Toyoda FA800S, is a CAT 50 horizontal machining center (HMC) with a two-pallet changer.
This 2018 machine has 944 IPM rapids, a 15-second pallet change, a 5,511 lb pallet load, and a 51.2" max workpiece height, with 1.97" to 47.24" from spindle center to pallet top. It comes equipped with a Fanuc 31i-Model B control, a Mayfran scraper type chip conveyor with 50-micron filter, air blow through tool, overhead coolant shower, and a washdown gun at the APC, with approximate dimensions of 291" x 192" x 166" and an approximate weight of 61,100 lbs.
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| X | 53.15" |
| Y | 45.28" |
| Z | 45.28" |
| Power | 60 hp |
| RPM | 6,000 RPM |
| # ATC | 120 |
| Taper | CAT-50 |
| Pallet-W | 31.5" |
| Pallet-L | 31.5" |
| # Axis | 4 |
| Control | CNC (Fanuc) |
Number of Pallets: 2
Pallet Change Time: 15 Seconds
Max Workpiece Height: 51.2"
Max Weight on Pallet: 5,511 lbs
B-Axis: 360° (Full NC Contouring Table)
Spindle Center to Pallet Top: 1.97" to 47.24"
Rapid Traverse Rate: 944 IPM
Cutting Feedrate Range: 0.04 to 944 IPM
Spindle Torque: 936 ft-lbs
Max Tool Diameter: 9.45"
Max Tool Weight: 77 lbs
Approximate Dimensions: 291" x 192" x 166"
Approximate Weight: 61,100 lbs
Fanuc 31i-Model B CNC Control
2MB Program Storage
300 Workpiece Coordinates
200 Pairs Tool Offsets
Gear Head Spindle
Big Plus Spindle
Renishaw RMP60 Spindle Probe
Renishaw NC4 Laser Tool Setter
Mayfran CS1 Scraper Type Chip Conveyor with 50-Micron Filter
1,000 PSI High-Pressure Coolant Through Spindle
Air Blow Through Tool
Overhead Coolant Shower
Handheld Washdown Gun at APC
We use cookies to improve your experience. Privacy Policy.