2006 Kingston LD50-200 CNC Lathe with 14.5" Spindle Bore
Have one to sell?
ConditionUsed
1 available
This 2006 Kingston LD50-200 is a CNC hollow spindle oil country lathe with a 14.5" hole through the spindle, 50" of swing over the bed, and 200" between centers. It runs a Fanuc 0i-TC control with front and rear mounted 32" 4-jaw chucks, a hydraulic tailstock, two steady rests, and a full length chip conveyor, with spindle speeds from 9 to 300 RPM.
Swing Over Cross Slide: 33.5"
Center Height: 25.6"
Spindle Speed Range: 9 to 300 RPM
Spindle Nose: A2-20
X-Axis Travel: 28.7"
Width of Cross Slide: 16.5"
Width of Carriage: 37.4"
Tailstock Spindle Center: 6 MT
Approximate Weight: 50,600 lbs
Fanuc 0i-TC CNC Control (Swing Away)
(2) 4-Jaw Chucks (Front and Rear Mounted)
Hydraulic Tailstock with Rotating Quill
(2) Steady Rests
Tool Post
Auto Lube System
Heavy-Duty Flat Bed Design
Jorgensen Full Length Chip Conveyor
This 2006 Kingston LD50-200 is a CNC hollow spindle oil country lathe with a 14.5" hole through the spindle, 50" of swing over the bed, and 200" between centers. It runs a Fanuc 0i-TC control with front and rear mounted 32" 4-jaw chucks, a hydraulic tailstock, two steady rests, and a full length chip conveyor, with spindle speeds from 9 to 300 RPM.
The Kingston LD50-200, also searched as Kingston LD 50-200, LD50 200, or LD50, is a CNC hollow spindle lathe, also known as an oil country lathe, built on a heavy-duty flat bed.
This 2006 machine has 33.5" of swing over the cross slide, a 25.6" center height, and 28.7" of X-axis travel, with an A2-20 spindle nose and a 6 MT tailstock center. It comes equipped with a rotating quill on the hydraulic tailstock, a tool post, an auto lube system, and a Jorgensen chip conveyor, with an approximate weight of 50,600 lbs.
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| Swing | 50" |
| Machining Length | 200" |
| # Axis | 2 |
| Chuck Size | 32" |
| Bar Capacity | 14.5" |
| Max RPM | 300 RPM |
| Tailstock | Yes |
| Control | CNC (Fanuc) |
Swing Over Cross Slide: 33.5"
Center Height: 25.6"
Spindle Speed Range: 9 to 300 RPM
Spindle Nose: A2-20
X-Axis Travel: 28.7"
Width of Cross Slide: 16.5"
Width of Carriage: 37.4"
Tailstock Spindle Center: 6 MT
Approximate Weight: 50,600 lbs
Fanuc 0i-TC CNC Control (Swing Away)
(2) 4-Jaw Chucks (Front and Rear Mounted)
Hydraulic Tailstock with Rotating Quill
(2) Steady Rests
Tool Post
Auto Lube System
Heavy-Duty Flat Bed Design
Jorgensen Full Length Chip Conveyor
We use cookies to improve your experience. Privacy Policy.