2016 Okuma Genos M560-V Vertical Machining Center with TSC
Have one to sell?
ConditionUsed
1 available
This 2016 Okuma Genos M560-V vertical machining center comes with through spindle coolant and a spindle chiller, running a 30 HP CAT-40 spindle up to 15,000 RPM. Travels are 41.34" X, 22.05" Y, and 18.11" Z over a 51.18" x 22.05" table, with a 32-station side-mounted tool changer.
X and Y-Axis Rapid Traverse: 1,575 IPM
Z-Axis Rapid Traverse: 1,260 IPM
Cutting Feed Rate: 1,260 IPM
Spindle Nose to Table: 5.91" to 24.02"
Max Table Load: 1,980 lbs
Max Tool Weight: 18 lbs
Max Tool Length: 11.81"
Max Tool Diameter: 3.54"
Air Required: 90 PSI, 4 SCFM
Electrical: 220V / 480V, 38.7 kVA, 3-Phase
Approximate Dimensions: 100" x 123" x 108"
Approximate Weight: 16,500 lbs
Okuma OSP-P300M Control
Through Spindle Coolant
Side-Mounted Automatic Tool Changer
Spindle Chiller Unit
MPG Handwheel
Automatic Lubrication Unit
Coolant Tank
Chip Conveyor
Leveling Pads
This 2016 Okuma Genos M560-V vertical machining center comes with through spindle coolant and a spindle chiller, running a 30 HP CAT-40 spindle up to 15,000 RPM. Travels are 41.34" X, 22.05" Y, and 18.11" Z over a 51.18" x 22.05" table, with a 32-station side-mounted tool changer.
The Okuma Genos M560-V, also searched as Okuma M560-V, Okuma M560V, Genos M560V, or Genos M560, is a 3-axis CNC vertical machining center (VMC).
This 2016 machine has rapid rates of 1,575 IPM on X and Y and 1,260 IPM on Z, with 5.91" to 24.02" from spindle nose to table and a 1,980 lb max table load. It comes equipped with an Okuma OSP-P300M control, chip conveyor, MPG handwheel, and automatic lubrication, with approximate dimensions of 100" x 123" x 108" and an approximate weight of 16,500 lbs.
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| X | 41.34" |
| Y | 22.05" |
| Z | 18.11" |
| Power | 30 hp |
| RPM | 15,000 RPM |
| # ATC | 32 |
| Taper | CAT-40 |
| Table-W | 22.05" |
| Table-L | 51.18" |
| # Axis | 3 |
| Control | CNC (OKUMA) |
X and Y-Axis Rapid Traverse: 1,575 IPM
Z-Axis Rapid Traverse: 1,260 IPM
Cutting Feed Rate: 1,260 IPM
Spindle Nose to Table: 5.91" to 24.02"
Max Table Load: 1,980 lbs
Max Tool Weight: 18 lbs
Max Tool Length: 11.81"
Max Tool Diameter: 3.54"
Air Required: 90 PSI, 4 SCFM
Electrical: 220V / 480V, 38.7 kVA, 3-Phase
Approximate Dimensions: 100" x 123" x 108"
Approximate Weight: 16,500 lbs
Okuma OSP-P300M Control
Through Spindle Coolant
Side-Mounted Automatic Tool Changer
Spindle Chiller Unit
MPG Handwheel
Automatic Lubrication Unit
Coolant Tank
Chip Conveyor
Leveling Pads
We use cookies to improve your experience. Privacy Policy.