2017 Mitsubishi MV2400S Wire EDM with Approximately 5,000 Machining Hours
Have one to sell?
ConditionUsed
1 available
This 2017 Mitsubishi MV2400S Advance Type 3 wire EDM has approximately 5,000 machining hours and comes equipped with a Mitsubishi M800 control, AT auto wire threader, V350-VAEII power supply with digital spark control, and linear glass scale feedback on X and Y. It has 23.6" x 15.7" x 12.2" travels with U and V axes, a 15° max taper angle, and a max workpiece size of 41.3" x 32.3" x 12" up to 3,307 lbs.
U-Axis Travel: -2.95"
V-Axis Travel: -2.95"
Max Taper Angle: 15°
Table Size: 33" x 22"
Max Workpiece Size: 41.3" x 32.3" x 12"
Max Workpiece Weight: 3,307 lbs
Max Wire Feed Rate: 51.2 in/min
Max Cutting Speed: 51.2 in/min
Dielectric Fluid Capacity: 227 gal
Internal Work Tank Height: 12.2"
Approximately 5,000 Machining Hours
Mitsubishi M800 CNC Control
Advance Type 3
V350-VAEII Amp Power Supply with Digital Spark Control
U and V Axis
Linear Motion Guide Ways
Linear Glass Scale Feedback X-Y Axis
This 2017 Mitsubishi MV2400S Advance Type 3 wire EDM has approximately 5,000 machining hours and comes equipped with a Mitsubishi M800 control, AT auto wire threader, V350-VAEII power supply with digital spark control, and linear glass scale feedback on X and Y. It has 23.6" x 15.7" x 12.2" travels with U and V axes, a 15° max taper angle, and a max workpiece size of 41.3" x 32.3" x 12" up to 3,307 lbs.
The Mitsubishi MV2400S, also searched as Mitsubishi MV2400 S, MV-2400S, or MV2400, is a CNC wire EDM (wire electrical discharge machine) with submerged machining.
This machine has a 33" x 22" table, a 227 gallon dielectric fluid capacity, a 12.2" internal work tank height, linear motion guide ways, and a 51.2 in/min max wire feed rate.
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| X | 23.6" |
| Y | 15.7" |
| Z | 12.2" |
| Auto Threading (Yes/No) | Yes |
| Submerged (Yes/No) | Yes |
| Control | CNC (Mitsubishi) |
U-Axis Travel: -2.95"
V-Axis Travel: -2.95"
Max Taper Angle: 15°
Table Size: 33" x 22"
Max Workpiece Size: 41.3" x 32.3" x 12"
Max Workpiece Weight: 3,307 lbs
Max Wire Feed Rate: 51.2 in/min
Max Cutting Speed: 51.2 in/min
Dielectric Fluid Capacity: 227 gal
Internal Work Tank Height: 12.2"
Approximately 5,000 Machining Hours
Mitsubishi M800 CNC Control
Advance Type 3
V350-VAEII Amp Power Supply with Digital Spark Control
U and V Axis
Linear Motion Guide Ways
Linear Glass Scale Feedback X-Y Axis
We use cookies to improve your experience. Privacy Policy.