2012 Victor Vturn 46 CNC Lathe with Programmable Tailstock
Have one to sell?
ConditionUsed
1 available
This 2012 Victor Vturn 46 CNC lathe comes equipped with a programmable tailstock, 15" 3-jaw chuck, 4-step gearbox drive, and high pressure coolant, with a Fanuc 0i-TD control. It has 32.28" of swing over the bed, 64.96" of max machined part length, 68.89" between centers, and 4.52" bar capacity, with a max spindle speed of 1,500 RPM.
Swing Over Carriage: 20.47"
Standard Part Size: 20.47"
Max Part Size: 28.74"
Distance Between Centers: 68.89"
Spindle Bore: 4.84"
Spindle Nose: A2-11
Spindle Speed Ranges: 4
Rapids: 472.44 IPM
Turret: 10 Station
Turret Index Time: 1 Sec
Turret Tool Size: 1.25"
Max Boring Bar Diameter: 2.36"
Electrical: 220V / 3 Phase / 50-60 Hz
KVA Rating: 63.6
Approximate Dimensions: 244.09" x 118.11" x 94.49"
Fanuc 0i-TD Control
3-Jaw Chuck with Approximately 4.5" Through Hole
Programmable Tailstock
4-Step Gearbox Drive
High Pressure Coolant
Chip Conveyor
Air-Conditioned Main Controls
Toolholders
This 2012 Victor Vturn 46 CNC lathe comes equipped with a programmable tailstock, 15" 3-jaw chuck, 4-step gearbox drive, and high pressure coolant, with a Fanuc 0i-TD control. It has 32.28" of swing over the bed, 64.96" of max machined part length, 68.89" between centers, and 4.52" bar capacity, with a max spindle speed of 1,500 RPM.
The Victor Vturn 46, also searched as Victor Taichung Vturn 46, Victor V-Turn 46, or Vturn46, is a big bore CNC turning center (CNC lathe).
This machine has 20.47" of swing over the carriage and a 10-station turret with 1.25" tool size, plus an A2-11 spindle nose with a 4.84" spindle bore and 472.44 IPM rapids. It also comes equipped with a chip conveyor, air-conditioned main controls, and toolholders, with approximate dimensions of 244.09" x 118.11" x 94.49".
All specifications are approximate, provided by the seller, and subject to buyer verification.
Imperial
| Machining Length | 64.961" |
| Chuck Size | 15" |
| Control | CNC (Fanuc) |
Swing Over Carriage: 20.47"
Standard Part Size: 20.47"
Max Part Size: 28.74"
Distance Between Centers: 68.89"
Spindle Bore: 4.84"
Spindle Nose: A2-11
Spindle Speed Ranges: 4
Rapids: 472.44 IPM
Turret: 10 Station
Turret Index Time: 1 Sec
Turret Tool Size: 1.25"
Max Boring Bar Diameter: 2.36"
Electrical: 220V / 3 Phase / 50-60 Hz
KVA Rating: 63.6
Approximate Dimensions: 244.09" x 118.11" x 94.49"
Fanuc 0i-TD Control
3-Jaw Chuck with Approximately 4.5" Through Hole
Programmable Tailstock
4-Step Gearbox Drive
High Pressure Coolant
Chip Conveyor
Air-Conditioned Main Controls
Toolholders
We use cookies to improve your experience. Privacy Policy.